[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [FC3] kernel-2.6.11-1.14_FC3 freezes on boot

Bob Marcan wrote:

Slava Bizyayev wrote:

On Tue, 2005-04-19 at 06:11, Jim Cornette wrote:

Yuandan Zhang wrote:

Michael Hennebry wrote:

On 16 Apr 2005, Slava Bizyayev wrote:

I use kernel-2.6.10-1.770_FC3 on my HP OmniBook XE2 pretty happily.
After updating kernel to kernel-2.6.11-1.14_FC3 I experience a strange
behavior -- in the end of the boot (instead of X-login screen) machine
freezes, and I cannot even get the terminal access with ctrl-alt-F1. Has
someone experienced something similar? What's the work around?

Hi, I got exactly the same problem. I upgaded kernel from kernel-2.6.10-1.770_FC3 on my HP nx5000 to kernel-2.6.11-1.14_FC3, Boot freezed. I troed to boot to the old kernel kernel-2.6.10-1.770_FC3, it froze too.

If the kernel-2.6.10-1.770_FC3 used to work and then stopped working after upgrading to the kernel-2.6.11-1.14_FC3 version, using the original kernel might not be of much help. There is probably a problem related to something else that you installed along with the kernel update that is causing you problems.

In my case kernel-2.6.10-1.770_FC3 is running just fine when I'm quick
enough to switch on boot...

Any other ideas?


Intel mobo D845GBV: kernel-2.6.11-1.14_FC3 starts fine with X. After 1 hour or more just freezes. Even over night with only daemons running. Got some ACPI errors. kernel-2.6.10-1.770_FC3 runs just fine.

mobo EP-61BXA-M (pre 2001 bios):
At boot it says the acpi can be forced by acpi=on
Same symptoms.
Lost complete installation (xfs fs).

Best regards, Bob

After remove rhgb from boot commend line, the new kernel (kernel-2.6.11-1.14_FC3). However, it frose a few time during run. I have to switch back to kernel-2.6.10-1.770_FC3. Hope someone discover a fix.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]