[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Since FC3 upgrade from FC2 (CD writer error) Any thoughs?



Kam Leo wrote:

On 4/25/05, Beri, Rohit <linuxlist beris net> wrote:

System
-----------------------
K3b Version:0.11.14
KDE Version: 3.3.1-2.9.FC3 Red Hat
QT Version: 3.3.4

cdrecord
-----------------------
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code
version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : SYNC
Vendor_info    : 'YAMAHA  '
Identifikation : 'CRW3200E        '
Revision       : '1.0b'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 7469952 = 7294 KB
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Track 01: data   152 MB
Total size:      174 MB (17:19.06) = 77930 sectors
Lout start:      175 MB (17:21/05) = 77930 sectors
Current Secsize: 2048
ATIP info from disk:
 Indicated writing power: 4
 Is not unrestricted
 Is not erasable
 Disk sub type: Medium Type A, low Beta category (A-) (2)
 ATIP start of lead in:  -11318 (97:31/07)
 ATIP start of lead out: 95475 (21:15/00)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 95475 Blocks current: 95475 Blocks remaining: 17545
Forcespeed is OFF.
Speed set to 706 KB/s
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
  1 seconds.
  0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
/usr/bin/cdrecord: Success. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 8.038s timeout 200s
/usr/bin/cdrecord: OPC failed.
Writing  time:   11.098s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
BURN-Free was never needed.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=6 -dao
driveropts=burnfree -eject -data -tsize=77930s -

mkisofs
-----------------------
77930
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
 0.65% done, estimate finish Mon Apr 25 23:28:58 2005
 1.29% done, estimate finish Mon Apr 25 23:28:58 2005
 1.92% done, estimate finish Mon Apr 25 23:28:58 2005
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
-appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN TRUEG AND
THE K3B TEAM -publisher  -preparer K3b - Version 0.11.14 -sysid LINUX
-volset-size 1 -volset-seqno 1 -sort /tmp/kde-user01/k3bw2LkQb.tmp
-rational-rock -hide-list /tmp/kde-user01/k3b1NvVua.tmp
-full-iso9660-filenames -iso-level 2 -path-list
/tmp/kde-user01/k3beRYWba.tmp
/home/user01/.kde/share/apps/k3b/temp/dummydir0/



Have you:


a) Upgraded cdrecord to latest version?
b) Verified permissions for /usr/bin/cdrecord is 755?
c) Upgraded K3b?
d) Use K3bSetup 2 to configure K3b?
e) Try cdrdao?
f) Checked SELinux context and/or upgraded SELinux policies?


The system has most updated files. I tested the permissions as well and they are 755... Not sure what else to test/verify... the same hardware with FC2 used to work fine even for some time on FC3... then there was this kernel ugrade and since then (its been a few months now), its stopped working...


Thanks,


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]