[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Since FC3 upgrade from FC2 (CD writer error) Any thoughs?



On 4/28/05, Beri, Rohit <linuxlist beris net> wrote:
> Kam Leo wrote:
> 
> >On 4/27/05, Beri, Rohit <linuxlist beris net> wrote:
> >
> >
> >>Kam Leo wrote:
> >>
> >>
> >>
> >>>On 4/25/05, Beri, Rohit <linuxlist beris net> wrote:
> >>>
> >>>
> >>>
> >>>>System
> >>>>-----------------------
> >>>>K3b Version:0.11.14
> >>>>KDE Version: 3.3.1-2.9.FC3 Red Hat
> >>>>QT Version: 3.3.4
> >>>>
> >>>>cdrecord
> >>>>-----------------------
> >>>>/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
> >>>>/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
> >>>>/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> >>>>/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
> >>>>setpriority().
> >>>>/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
> >>>>scsidev: '/dev/hdd'
> >>>>devname: '/dev/hdd'
> >>>>scsibus: -2 target: -2 lun: -2
> >>>>Linux sg driver version: 3.5.27
> >>>>/usr/bin/cdrecord: Warning: using inofficial libscg transport code
> >>>>version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
> >>>>1.83 04/05/20 Copyright 1997 J. Schilling').
> >>>>SCSI buffer size: 64512
> >>>>Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
> >>>>Jörg Schilling
> >>>>Note: This version is an unofficial (modified) version with DVD support
> >>>>Note: and therefore may have bugs that are not present in the original.
> >>>>Note: Please send bug reports or support requests to
> >>>>http://bugzilla.redhat.com/bugzilla
> >>>>Note: The author of cdrecord should not be bothered with problems in
> >>>>this version.
> >>>>TOC Type: 1 = CD-ROM
> >>>>Using libscg version 'schily-0.8'.
> >>>>Driveropts: 'burnfree'
> >>>>atapi: 1
> >>>>Device type    : Removable CD-ROM
> >>>>Version        : 2
> >>>>Response Format: 2
> >>>>Capabilities   : SYNC
> >>>>Vendor_info    : 'YAMAHA  '
> >>>>Identifikation : 'CRW3200E        '
> >>>>Revision       : '1.0b'
> >>>>Device seems to be: Generic mmc CD-RW.
> >>>>Current: 0x0009
> >>>>Profile: 0x0008
> >>>>Profile: 0x0009 (current)
> >>>>Profile: 0x000A
> >>>>Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> >>>>Driver flags   : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED
> >>>>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
> >>>>Drive buf size : 7469952 = 7294 KB
> >>>>FIFO size      : 4194304 = 4096 KB
> >>>>/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> >>>>/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
> >>>>setpriority().
> >>>>/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
> >>>>Track 01: data   152 MB
> >>>>Total size:      174 MB (17:19.06) = 77930 sectors
> >>>>Lout start:      175 MB (17:21/05) = 77930 sectors
> >>>>Current Secsize: 2048
> >>>>ATIP info from disk:
> >>>> Indicated writing power: 4
> >>>> Is not unrestricted
> >>>> Is not erasable
> >>>> Disk sub type: Medium Type A, low Beta category (A-) (2)
> >>>> ATIP start of lead in:  -11318 (97:31/07)
> >>>> ATIP start of lead out: 95475 (21:15/00)
> >>>>Disk type:    Short strategy type (Phthalocyanine or similar)
> >>>>Manuf. index: 22
> >>>>Manufacturer: Ritek Co.
> >>>>Blocks total: 95475 Blocks current: 95475 Blocks remaining: 17545
> >>>>Forcespeed is OFF.
> >>>>Speed set to 706 KB/s
> >>>>Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
> >>>>Last chance to quit, starting real write in 2 seconds.
> >>>>  1 seconds.
> >>>>  0 seconds.
> >>>>Operation starts.
> >>>>Waiting for reader process to fill input buffer ... input buffer ready.
> >>>>trackno=0
> >>>>BURN-Free is OFF.
> >>>>Turning BURN-Free on
> >>>>Performing OPC...
> >>>>/usr/bin/cdrecord: Success. send opc: scsi sendcmd: no error
> >>>>CDB:  54 01 00 00 00 00 00 00 00 00
> >>>>status: 0x2 (CHECK CONDITION)
> >>>>Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
> >>>>Sense Key: 0x3 Medium Error, Segment 0
> >>>>Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
> >>>>Sense flags: Blk 0 (not valid)
> >>>>cmd finished after 8.038s timeout 200s
> >>>>/usr/bin/cdrecord: OPC failed.
> >>>>Writing  time:   11.098s
> >>>>/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
> >>>>/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
> >>>>100%.
> >>>>BURN-Free was never needed.
> >>>>
> >>>>cdrecord comand:
> >>>>-----------------------
> >>>>/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=6 -dao
> >>>>driveropts=burnfree -eject -data -tsize=77930s -
> >>>>
> >>>>mkisofs
> >>>>-----------------------
> >>>>77930
> >>>>INFO: UTF-8 character encoding detected by locale settings.
> >>>>Assuming UTF-8 encoded filenames on source filesystem,
> >>>>use -input-charset to override.
> >>>> 0.65% done, estimate finish Mon Apr 25 23:28:58 2005
> >>>> 1.29% done, estimate finish Mon Apr 25 23:28:58 2005
> >>>> 1.92% done, estimate finish Mon Apr 25 23:28:58 2005
> >>>>/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
> >>>>
> >>>>mkisofs comand:
> >>>>-----------------------
> >>>>/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
> >>>>-appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN TRUEG AND
> >>>>THE K3B TEAM -publisher  -preparer K3b - Version 0.11.14 -sysid LINUX
> >>>>-volset-size 1 -volset-seqno 1 -sort /tmp/kde-user01/k3bw2LkQb.tmp
> >>>>-rational-rock -hide-list /tmp/kde-user01/k3b1NvVua.tmp
> >>>>-full-iso9660-filenames -iso-level 2 -path-list
> >>>>/tmp/kde-user01/k3beRYWba.tmp
> >>>>/home/user01/.kde/share/apps/k3b/temp/dummydir0/
> >>>>
> >>>>
> >>>>
> >>>>
> >>>Have you:
> >>>
> >>>a) Upgraded cdrecord to latest version?
> >>>b) Verified permissions for /usr/bin/cdrecord is 755?
> >>>c) Upgraded K3b?
> >>>d) Use K3bSetup 2 to configure K3b?
> >>>e) Try cdrdao?
> >>>f) Checked SELinux context and/or upgraded SELinux policies?
> >>>
> >>>
> >>>
> >>The system has most updated files. I tested the permissions as well and they are 755... Not sure what else to test/verify... the same hardware with FC2 used to work fine even for some time on FC3... then there was this kernel ugrade and since then (its been a few months now), its stopped working...
> >>
> >>Thanks,
> >>
> >>
> >>
> >
> >This kernel upgrade? Please be more specific. Which kernel?
> >
> >Run the following commands and send back the results:
> >
> >$ uname -r`
> >
> >
> >$ rpm -q kernel
> >
> >
> >Are you able to boot an older kernel?  If so, does K3b work with that kernel?
> >
> >
> 
> uname -r
> 2.6.11-1.14_FC3
> 
> i have removed all old kernel from the machine... but i guess 2.4 kernel
> and early 2.6 were where it worked great... sorry i don't remember
> specific patch numbers....
> 

Do you remember if you could burn CDs using the 2.6.10 kernel?  If so
you can still download and install it.  You can get the rpm from here:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/3/i386/

After you download the file, install it using "rpm -ivh kernel-2.6.10....rpm".


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]