SCSI scanner device ownership and permissions
D. Hugh Redelmeier
hugh at mimosa.com
Sat Aug 13 22:34:21 UTC 2005
| From: Paul Howarth <paul at city-fan.org>
| It tells me how to write a udev rule that will create an appropriate
| link for your scanner at boot time :-)
Ah. udev(8) explains this. I know you know, but I am stating this
for others who read this thread.
| Create a file /etc/udev/rules.d/10-custom.rules containing the following
| line:
|
| BUS="scsi", SYSFS{vendor}="UMAX*", SYSFS{model}="Astra*", SYMLINK="scanner%n"
[This should be in one line.]
| You should get an appropriate symlink created next time the sg module is
| loaded (e.g. at reboot). The name of the symlink is such that the
| existing "console" rules will change ownership of the device to the
| currently-logged-in user.
This works well. Thanks!
Is there a reason that this line should not be included as a standard
part of /etc/udev/rules.d/50-udev.rules (which is in turn a part of
the udev rpm)?
The scanner isn't recognized when I turn on the scanner sometime after
booting. As far as I can make out from reading proc(5)'s
/proc/scsi/scsi entry, I need to prod the scsi system to rescan the
bus. In my case, it did so when I (as root) issued:
echo 'scsi add-single-device 0 0 5 0' >/proc/scsi/scsi
^ LUN
^ SCSI ID
^ host adapter channel
^ host adapter
Even though this seems to be a very specific request, it seemed to
cause all sorts of activity in the SCSI subsystem. Here's the
relevant part of dmesg:
usb 1-2.2: reset high speed USB device using ehci_hcd and address 6
(scsi0:A:5:0): refuses WIDE negotiation. Using 8bit transfers
(scsi0:A:5:0): refuses synchronous negotiation. Using asynchronous transfers
Vendor: UMAX Model: Astra 1200S Rev: V2.9
Type: Scanner ANSI SCSI revision: 02
target0:0:5: Beginning Domain Validation
target0:0:5: Ending Domain Validation
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 1, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 2, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 3, type 0
Attached scsi generic sg4 at scsi0, channel 0, id 5, lun 0, type 6
It seem especially funny that USB (scsi1) would get re-examined. That is a
different host adapter.
Is there a way that the SCSI scanner could be automatically recognized
when it is turned on?
More information about the fedora-list
mailing list