Two audigy problems
david walcroft
david_walcroft at yahoo.com.au
Thu Dec 8 06:29:47 UTC 2005
flp wrote:
> david walcroft wrote:
>
>> I have just bought an Audigy Value card,the problems are:-
>>
>> 1/ What programme reads a Creative extention ".chm"
>
>
> I don't think that's a Creative extension, it is probably:
>
> HTML Help Compiled Help File (Microsoft).
>
>>
>> 2/ Sound is nothing but static between the first 2 notes and the last 2
>> notes of any sound sequence.
>>
>> Any ideas on these.
>>
>> Part lsmod
>>
>> snd_ca0106 29797 0
>> snd_ac97_codec 88893 1 snd_ca0106
>> snd_seq_dummy 3781 0
>> snd_seq_oss 31937 0
>> snd_seq_midi_event 7105 1 snd_seq_oss
>> snd_seq 49873 5
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>> snd_seq_device 9165 3 snd_seq_dummy,snd_seq_oss,snd_seq
>> snd_pcm_oss 51057 0
>> snd_mixer_oss 18113 1 snd_pcm_oss
>> snd_pcm 87749 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss
>> snd_timer 25285 2 snd_seq,snd_pcm
>> snd 54949 9
>> snd_ca0106,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>>
>> soundcore 9889 1 snd
>> snd_ac97_bus 2497 1 snd_ac97_codec
>> snd_page_alloc 10825 2 snd_ca0106,snd_pcm
>>
>
> It doesn't look like you have the Creative stuff loaded from the above,
> it probably should look more like:
>
> snd_emu10k1_synth 8513 0
> snd_emux_synth 42561 1 snd_emu10k1_synth
> snd_seq_virmidi 7105 1 snd_emux_synth
> snd_seq_midi_event 9281 1 snd_seq_virmidi
> snd_seq_midi_emul 7233 1 snd_emux_synth
> snd_seq 61777 4
> snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul
> snd_emu10k1 128965 3 snd_emu10k1_synth
> snd_rawmidi 29664 2 snd_seq_virmidi,snd_emu10k1
> snd_seq_device 8653 5
> snd_emu10k1_synth,snd_emux_synth,snd_seq,snd_emu10k1,snd_rawmidi
> snd_ac97_codec 74937 1 snd_emu10k1
> snd_pcm_oss 50673 0
> snd_mixer_oss 17729 2 snd_pcm_oss
> snd_pcm 98889 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
> snd_timer 32837 3 snd_seq,snd_emu10k1,snd_pcm
> snd_page_alloc 9669 2 snd_emu10k1,snd_pcm
> snd_util_mem 4673 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 8929 2 snd_emux_synth,snd_emu10k1
> snd 57285 14
> snd_emux_synth,snd_seq_virmidi,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
>
> soundcore 10785 2 snd
>
> =========================================================
>
>> modprobe.conf
>>
>> alias eth0 tulip
>> alias eth1 tulip
>> # options snd-via82xx index=0
>> # remove snd-via82xx { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
>> }; /sbin/modprobe -r --ignore-remove snd-via82xx
>> alias usb-controller ehci-hcd
>> alias usb-controller1 uhci-hcd
>> alias net-pf-10 off
>> install ipv6 /bin/true
>> options loop max-loop=32
>> # I2C module options
>> alias char-major-89 i2c-dev
>> options snd cards_limit=1
>> alias snd-card-0 snd-ca0106
>> options snd-card-0 index=0
>> options snd-ca0106 index=0
>> remove snd-ca0106 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
>> /sbin/modprobe -r --ignore-remove snd-ca0106
>
>
> Also in my modprobe.conf I have the following rather than what you have:
>
> remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> /sbin/modprobe -r --ignore-remove snd-emu10k1
> alias snd-card-0 snd-emu10k1
> options snd-card-0 index=0
>
> (the first two lines are all on ONE line in the file)
>
> I am running FC3 and did nothing more than allow the system to configure
> it once I rebooted after installed my Audigy card. I don't have the
> 'value' model, I don't recall which one I do have. From what you have
> listed it looks like the system is still seeing the old (onboard?)
> settings. Did you turn them off in the BIOS after installing the Audigy?
>
> ciao,
> furlan
>
>
flp,
You would recommend I "rmmod snd_ca0106 " then "modprobe snd_emu" but
how to make it permanent through reboots?
thanks david
More information about the fedora-list
mailing list