Reconfigure kernel for dmx3191d.ko module.
Paul Howarth
paul at city-fan.org
Mon Feb 14 16:28:32 UTC 2005
Paul Howarth wrote:
> You are probably running kernel 2.6.9-1.667 but have built modules for
> kernel 2.6.9-prep. Why not follow the instructions at
> http://crab-lab.zool.ohiou.edu/kevin/kernel-compilation-tutorial-en/ to
> build yourself a full new kernel with this module included? Or follow
> the instructions in the release notes to build the module out-of-tree?
Elaborating on this, here's how I built the dmx3191d.ko module using the
out-of-tree method.
1. Grab the source for the module:
(a) $ rpm -ivh ../kernel-2.6.10-1.760_FC3.src.rpm
[ I have a local RPM build area ~/BUILD so I don't need to
do this as root ]
(b) $ cd ~/BUILD/SPECS/
(c) $ rpmbuild -bp --target i686 kernel-2.6.spec
[ you'll need to change the target to x86_64 ]
(d) $ mkdir ~/temp; cd ~/temp
(e) Copy the following files from
~/BUILD/BUILD/kernel-2.6.10/linux-2.6.10/drivers/scsi to ~/temp:
dmx3191d.c
scsi.h
NCR5380.c
NCR5380.h
scsi_obsolete.h
scsi_typedefs.h
(FWIW, I arrived at this list of files by first copying just
the dmx3191d.c file and attempting the "Build module" phase below
until no more errors were found when building the module)
2. Create a Makefile for the module in ~/temp.
Appropriate Makefile is attached. This is basically the one suggested
in the FC3 release notes, with an "install" section added to put the
module in the right place.
3. Build module
Just run "make" in the ~/temp directory:
$ make
make -C /lib/modules/2.6.10-1.760_FC3/build
SUBDIRS=/nis-home/phowarth/temp modules
make[1]: Entering directory `/lib/modules/2.6.10-1.760_FC3/build'
CC [M] /nis-home/phowarth/temp/dmx3191d.o
/nis-home/phowarth/temp/NCR5380.c:628: warning:
'NCR5380_print_options' defined but not used
/nis-home/phowarth/temp/NCR5380.c:351: warning: 'phases' defined
but not used
/nis-home/phowarth/temp/NCR5380.c:571: warning: 'NCR5380_probe_irq'
defined but not used
Building modules, stage 2.
MODPOST
CC /nis-home/phowarth/temp/dmx3191d.mod.o
LD [M] /nis-home/phowarth/temp/dmx3191d.ko
make[1]: Leaving directory `/lib/modules/2.6.10-1.760_FC3/build'
4. Install module
$ su
# make install
make -C /lib/modules/2.6.10-1.760_FC3/build
SUBDIRS=/nis-home/phowarth/temp modules_install
make[1]: Entering directory `/lib/modules/2.6.10-1.760_FC3/build'
INSTALL /nis-home/phowarth/temp/dmx3191d.ko
make[1]: Leaving directory `/lib/modules/2.6.10-1.760_FC3/build'
# /sbin/depmod -a
5. Load module
At this point, "modprobe dmx3191d" should work.
Paul.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Makefile
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20050214/58b113d8/attachment-0001.ksh>
More information about the fedora-list
mailing list