sound problems on fedora core 3 and tv card
Arx Henrique
arxcruz at gmail.com
Sat Feb 19 16:57:26 UTC 2005
Hi all
I have a tv card pixelview99. they works fine, but the sound dont
works and i dont know how to work.
i'm using kernel 2.6.10-1.766_FC3
here my lsmod output
Module Size Used by
bttv 148753 1
msp3400 23145 0
tvaudio 20321 0
tuner 19565 0
vfat 12609 1
fat 39905 1 vfat
parport_pc 26629 1
lp 12077 0
parport 37001 2 parport_pc,lp
dm_mod 55637 0
video 15813 0
button 6609 0
battery 9285 0
ac 4805 0
md5 4033 1
ipv6 231681 466
uhci_hcd 31449 0
video_buf 21829 1 bttv
i2c_algo_bit 8392 1 bttv
v4l2_common 5825 1 bttv
btcx_risc 4681 1 bttv
videodev 9537 2 bttv
snd_bt87x 13829 3
i2c_viapro 7245 0
i2c_core 20801 6
bttv,msp3400,tvaudio,tuner,i2c_algo_bit,i2c_viapro
snd_via82xx 27745 4
snd_ac97_codec 67489 1 snd_via82xx
snd_pcm_oss 47989 0
snd_mixer_oss 17089 6 snd_pcm_oss
snd_pcm 93001 4
snd_bt87x,snd_via82xx,snd_ac97_codec,snd_pcm_osssnd_timer
29125 1 snd_pcm
snd_page_alloc 9541 3 snd_bt87x,snd_via82xx,snd_pcm
gameport 4929 1 snd_via82xx
snd_mpu401_uart 9025 1 snd_via82xx
snd_rawmidi 25953 1 snd_mpu401_uart
snd_seq_device 8525 1 snd_rawmidi
snd 52645 14
snd_bt87x,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 10017 6 snd
8139too 26433 0
mii 4673 1 8139too
floppy 57841 0
ext3 116297 1
jbd 69977 1 ext3
my lspci output
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
and my dmesg output
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 11, latency: 32, mmio: 0xef002000
bttv0: using: Prolink PixelView PlayTV pro [card=37,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init]
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
tuner: type set to 8 (Temic NTSC (4036 FY5)) by insmod option
tuner: The type=<n> insmod option will go away soon.
tuner: Please use the tuner=<n> option provided by
tuner: tv aard core driver (bttv, saa7134, ...) instead.
bttv0: using tuner=5
tuner: type already set to 8, ignoring request for 5
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
--
"A fé remove montanas, mas eu prefiro a dinamite"
More information about the fedora-list
mailing list