Kernel 2.6.10-1.737_FC3smp: Crashes on boot

[David Cary Hart]

On Thu, 2005-01-13 at 17:05 +0000, Terry Barnaby wrote:
> Hi,
> 
> I have a dual processor server with Raid SCSI disks that is running
> Fedora3 with the 2.6.9-1.724_FC3smp kernel.
> 
> I have just performed an update to the 2.6.10-1.737_FC3smp kernel, but
> the system locks up on booting at the message:
> 
> 	ACPI: Using IOAPIC for interrupt routing

I posted, to our web site, the 686 config and noticed some non-fedora
configuration selections. I suspect that there MIGHT be some compilation
issues with the disclaimer that I am a bit of a neophyte.

OTH, I have a server with SCSI RAID (0) working just fine with the Korg
2.6.10 - no LVM. Just my opinion but, as the kernels become more
complex, the need for customization would seem to increase. Again I'm a
neophyte but there seems to be a huge difference in the number of
options between the 2.4 kernel that I used in RH9 and today's 2.6.10
offering. 


> 
> Other single processor systems here work fine with the 2.6.10-1.737_FC3
> kernel.
> I presume there is some problem with this kernel ?
> 
> My System is:
> Motherboard:	Supermicro X5DA8
> Processors:	2.4GHz Xeon
> Ram:		1GByte
> SCSI:		Onboard Adaptec AIC-7902 Dual Channel SCSI controller
> SCSIDisks:	Two Seagate ST3146807LW 147GByte SCSI drives
> 
> SoftwareIs:	Fedora 3 updated to 13/1/05
> DiskSetup:	Raid1 partitions
> 
> Terry

________________________________________________________________________
Total Quality Management - A Commitment to Excellence
http://www.TQMcube.com