FC3 Print Sharing
Steve Croteau
stevecroteau at comcast.net
Thu Jul 7 00:43:29 UTC 2005
On Wednesday 06 July 2005 4:44 pm, Rick Stevens wrote:
> Steve Croteau wrote:
> > On Wednesday 06 July 2005 3:02 pm, Alexander Dalloz wrote:
> >>Am Mi, den 06.07.2005 schrieb Steve Croteau um 23:44:
> >>>>>Even after rebooting box #2 still isn't seeing the printer on box #1.
> >>>>>Does CUPS automatically display browsed queues or will I have to
> >>>>>manually add it?
> >>>>
> >>>>I somehow missed the information what OS box #2 runs.
> >>>
> >>>Both boxes run FC3.
> >>
> >>Ok. So using printconf-gui, adding a printer, using IPP network printer
> >>and as address http://<IP #1>:631 (left field) /printer/<queue_name>
> >>(right field) does not work?
> >>
> >>Alexander
> >
> > Alexander,
> > Here are my client (box #2) settings and also the error message.
> >
> > Networked Cups (IPP)
> > 192.168.0.2/255.255.255.0 (left field)
>
> There shouldn't be a netmask there. You're targeting a MACHINE,
> not a network.
>
> > /printers/deskjet-5550 (right field)
>
> It should be the name of the printer as known on the print server (in
> your case, the machine 192.168.0.2).
>
> > In description field under main print config window;
> > Network host '192.168.0.2' is busy; will try again in 30 seconds...
> >
> >
> >
> > Here are my server (box #1) settings
> >
> > queue name: deskjet-5550
> > Locally-connected
> > /dev/usb/lp0 hp deskjet 5550
> >
> > Sharing is configured as:
> > 192.168.0.3 255.255.255.0
>
> That should be "192.168.0.0/24" or "192.168.0.0/255.255.255.0". Make
> sure 192.168.0.3 (the printing client) can ping 192.168.0.2 (the
> print server) and vice versa. You should also get on the .0.2 machine
> (server) and, as root, do a
>
> netstat -lpn | grep 631
>
> and make sure the machine is actually listening to the network on port
> 631.
>
> Also check your iptables configuration ("iptables -L -n") on BOTH
> machines and make sure you aren't blocking TCP or UDP port 631. If you
> used the default "firewall security" option during install, they're
> blocked--the "medium" level blocks all incoming connections except DNS.
> Should you need to change it, run "system-config-securitylevel" or
> "HatIcon->System Settings->Security level".
> ----------------------------------------------------------------------
> - Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
> - VitalStream, Inc. http://www.vitalstream.com -
> - -
> - Better to understand a little than to misunderstand a lot. -
> ----------------------------------------------------------------------
Thank you Rick,
OK, I've changed the server field on the client box to just 192.168.0.2.
Both machines can ping each other and using your "netstat -lpn | grep 631"
command, the server showed the client (192.168.0.3) listed under tcp.
0.0.0.0 under udp. (I think that makes sense)
Under Applications - System Settings - Security level, I had already added
631:tcp and 631:udp under "other ports".
My next question is in regards to the "path" field on the client box where I
have the following: /printers/deskjet-5550
I obviously don't have a /printers directory. My limited understanding is
that I need the exact name of the print queue here: deskjet-5550. But what
about the name "printers"? Should that be the device
path /dev/usb/lp0/deskjet-5550? Or just /dev/usb/lp0? Or
192.168.0.2/deskjet-5550? Or ???
Thank you very much!!
Steve
More information about the fedora-list
mailing list