Yum failing me...
Ausband, Jeff
JAusband at tele-optics.com
Fri Jul 29 18:58:20 UTC 2005
I installed smart, and done a smart upgrade. It downloaded all of the
files and installed up to gnome-games and locked up on me. After restart
I get:
"error: 'rpm' python module is not available"
Now I cannot use Yum, Smart and Up2date.
Any suggestions?
Jeff Ausband
-----Original Message-----
From: fedora-list-bounces at redhat.com
[mailto:fedora-list-bounces at redhat.com] On Behalf Of
fedora-list-request at redhat.com
Sent: Friday, July 29, 2005 4:09 AM
To: fedora-list at redhat.com
Subject: fedora-list Digest, Vol 17, Issue 344
Send fedora-list mailing list submissions to
fedora-list at redhat.com
To subscribe or unsubscribe via the World Wide Web, visit
http://www.redhat.com/mailman/listinfo/fedora-list
or, via email, send a message with subject or body 'help' to
fedora-list-request at redhat.com
You can reach the person managing the list at
fedora-list-owner at redhat.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of fedora-list digest..."
Today's Topics:
1. Re: Rhythmbox sound skips when launching other programs or
checking mail (Klaasjan Brand)
2. Re: FC4 kernel compile (Further errors) (david walcroft)
3. Re: kernel source (Paul Howarth)
4. Re: FC4 - Firefox Personality ? (Dotan Cohen)
5. Re: vsftpd config (Paul Howarth)
6. Re: Yum failing me... (Paul Howarth)
7. Prelink eating all my resources (Dotan Cohen)
8. Re: Prelink eating all my resources (Peter Teuben)
9. Re: Uninstalling exim (when turning it off is not enough)
(Paul Howarth)
10. Re: yum-daily.yum - FC4 (Paul Howarth)
11. Re: Prelink eating all my resources (Dotan Cohen)
12. Re: kde kicker crashes (Anil Kumar Sharma)
13. Shock system lockup! (Neil Marjoram)
14. Re: sound problem with Dell 510m - also Gateway Solo 2150
(Bob Gustafson)
----------------------------------------------------------------------
Message: 1
Date: Fri, 29 Jul 2005 08:50:29 +0200
From: Klaasjan Brand <klaasjan at gmail.com>
Subject: Re: Rhythmbox sound skips when launching other programs or
checking mail
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <8bb8e93605072823507913657c at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On 7/29/05, Anthony Dean <adean75 at sbcglobal.net> wrote:
> Hi...
>
> In my Fedora Core 4 setup (256 MB RAM, 2.4 ghz Celeron processor,
> whitebox PC), for some reason, the sound in Rhythmbox keeps skipping
(as
> if it were being fast-forwarded through the track) when I either
launch
> some programs (even the terminal) or when I do something such as fetch
> email from the server with Evolution.
Another one here: I've got exactly the same problem on a laptop using
the snd_intel8x0 driver. First I thought it was about Rhythmbox not
processing the cpu speed changes (speedstep) correctly, but since then
I've found out it happens without speed changes too.
I think you're right it's when the CPU load spikes.
It's happening in XMMS too, but with different results (sound goes
silent).
> I'm not sure how to go about fixing this; any suggestions?
My current guess is it's a bug in the sound driver.
Please post your sound card details (and lsmod output, I'm interested
which driver you use).
Klaasjan
------------------------------
Message: 2
Date: Fri, 29 Jul 2005 16:52:36 +1000
From: david walcroft <david_walcroft at yahoo.com.au>
Subject: Re: FC4 kernel compile (Further errors)
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <42E9D234.3090002 at yahoo.com.au>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Kenny Gow wrote:
> david walcroft wrote:
>
>> david walcroft wrote:
>>
>>> Kenny Gow wrote:
>>>
>>>> david walcroft wrote:
>>>>
>>>>> Hi,
>>>>> My problem is the following error:
>>>>>
>>>>> Makefile:447:
>>>>>
/home/david/rpmbuild/BUILD/kernel-2.6.12/linux-2.6.12/arch//Makefile:
>>>>> No such file or directory
>>>>>
>>>>> make: *** No rule to make target
>>>>>
`/home/david/rpmbuild/BUILD/kernel-2.6.12/linux-2.6.12/arch//Makefile'.
>>>>>
>>>>>
>>>>> Stop.
>>>>>
>>>>> error: Bad exit status from /var/tmp/rpm-tmp.26847 (%prep)
>>>>>
>>>>> I did a 'rpmbuild -bp --target=i686'
>>>>> 'cd BUILD/kernel-2.6.12/linux-2.6.12/' 'make menuconfig'
>>>>> 'cp .config SOURCES/kernel-2.6.12-i686.config'
>>>>> 'rpmbuild -bb --target=i686 SPECS/kernel-2.6.12.spec'
>>>>>
>>>>> I have tried install/run several times,'cp Makefile
>>>>> BUILD/kernel-2.6.12/linux-2.6.12/arch/' nothing is working.
>>>>>
>>>>> What am I doing wrong
>>>>>
>>>>> david
>>>>>
>>>>
>>>> https://www.redhat.com/archives/fedora-list/2005-May/msg00401.html
>>>>
>>> Thanks Kenny,
>>>
>>> Compiling as I write. david
>>>
>> Another error close to the end of compiling (most frustrating)
>>
>> well heres the end error:
>>
>> + mkdir -p
>> /var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root/usr/lib/debug/boot
>> + mkdir -p /var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root/boot
>> + install -m 644 .config
>>
/var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root/boot/config-2.6.12-1.1
398_FC4.Alsa.davidsmp
>>
>> + install -m 644 System.map
>>
/var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root/boot/System.map-2.6.12
-1.1398_FC4.Alsa.davidsmp
>>
>> + cp arch/i386/boot/bzImage
>>
/var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root/boot/vmlinuz-2.6.12-1.
1398_FC4.Alsa.davidsmp
>>
>> + '[' -f arch/i386/boot/zImage.stub ']'
>> + mkdir -p
>>
/var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root/lib/modules/2.6.12-1.1
398_FC4.Alsa.davidsmp
>>
>> + make -s ARCH=i386
>> INSTALL_MOD_PATH=/var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root
>> modules_install KERNELRELEASE=2.6.12-1.1398_FC4.Alsa.davidsmp
>> /bin/sh: line 1: 1369 Killed /sbin/depmod -ae -F
>> System.map -b /var/tmp/kernel-2.6.12-1.1398_FC4.Alsa.david-root -r
>> 2.6.12-1.1398_FC4.Alsa.davidsmp
>> make: *** [_modinst_post] Error 137
>> error: Bad exit status from /var/tmp/rpm-tmp.62431 (%build)
>>
>> Watch for line wrap
>>
>> Thanks david
>>
>
> Just a guess, but in your original message, you put
>
> >>>> 'cp .config SOURCES/kernel-2.6.12-i686.config'
>
> which indicates you were using the i686 non-SMP config file,
> but your error output suggests you were building an SMP version of a
> kernel rpm.
>
> Perhaps you should have started with the SMP config file,
>
> kernel-2.6.12-i686-smp.config
>
> I didn't run into any problems compiling but I turned off building SMP
> in the spec file: %define buildsmp 0
>
I did Kenny.
# Override generic defaults with per-arch defaults
%ifarch noarch
%define builddoc 1
%define buildup 0
%define buildsmp 0
%define all_arch_configs $RPM_SOURCE_DIR/kernel-%{kversion}-*.config
%endif
from the kernel-2.6.spec.
david
------------------------------
Message: 3
Date: Fri, 29 Jul 2005 07:57:57 +0100
From: Paul Howarth <paul at city-fan.org>
Subject: Re: kernel source
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <1122620277.2851.80.camel at laurel.intra.city-fan.org>
Content-Type: text/plain
On Thu, 2005-07-28 at 13:33 -0400, paul d jones wrote:
> Hi,
>
> I hope this has not been asked recently....
>
> I am having a bit of difficulty installing the kernel source for the
> 2.6.12-1.1372_FC3 kernel.I need this for the reinstallation of my
nvidia
> driver.
> I tried to follow the instructions for installing the sources as found
> in "http://www.mjmwired.net/resources/mjm-fedora-fc3.shtml". Basically
>
> 1. rpm -ivh kernel-2.6.9-1.667.src.rpm
>
> followed by
>
> 2.rpmbuild -bp --target=noarch /usr/src/redhat/SPECS/kernel-2.6.spec
> But alas, my nvidia installer is not finding the kernel source tree.
> Even when using the --kernel-source-path /usr/src/BUILD/kernel-2.6.12
> nvidia installer option, I still get error messages.
>
> If you cannot tell, I kinda have no idea what I am doing :-)
>
> Oh... I cannot find a source rpm via yum, are they no longer available
> in the repositories? or am I not looking in the right place (using the
> default yum repos...)
>
> Any help would be appreciated.
You don't need the full kernel source to build the nvidia drivers.
# yum install kernel-devel
and then try building your drivers again. That should be sufficient.
Paul.
--
Paul Howarth <paul at city-fan.org>
------------------------------
Message: 4
Date: Fri, 29 Jul 2005 09:59:08 +0300
From: Dotan Cohen <dotancohen at gmail.com>
Subject: Re: FC4 - Firefox Personality ?
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <880dece0050728235974a09992 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On 7/29/05, taharka <res00vl8 at alltel.net> wrote:
> OK, cool. I'm strictly concentrating on firefox. Question, will your
site list the sites that get reported to you?
>
> taharka
>
> Lexington, Kentucky U.S.A.
Of course. The idea is to provide a place to 'find' these sites. So
that in one's spare time one could visit them and surf around in
firefox. The intent is to make firefox (or opera or konquerer or any
other browser) a larger percent of total browser share for that site.
So when the webmaster looks at stats, he will see the need to support
these browsers.
I also am organizing sections on standards compliance, and suggestions
for writing to these webmasters. Links to firefox and opera will be
provided, as well as news regarding developments in browsers.
Dotan Cohen
http://lyricslist.com/lyrics/artist_albums/108/carey_mariah.php
Carey, Mariah Song Lyrics
------------------------------
Message: 5
Date: Fri, 29 Jul 2005 08:05:30 +0100
From: Paul Howarth <paul at city-fan.org>
Subject: Re: vsftpd config
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <1122620730.2851.85.camel at laurel.intra.city-fan.org>
Content-Type: text/plain
On Thu, 2005-07-28 at 21:42 +0200, Alexander Dalloz wrote:
> Am Do, den 28.07.2005 schrieb Will Yardley um 21:26:
> > On Thu, Jul 28, 2005 at 07:27:13PM +0200, Alexander Dalloz wrote:
> > > Am Do, den 28.07.2005 schrieb Marcel Janssen um 19:13:
>
> > > > I'd like to open vsftp for anonymous users to write. I just need
> > > > that for a short moment so that someone can upload something.
> >
> > > Can't you just create a specific user for that purpose? Not to
ship
> > > around your configuration problem, but for safety. FTP servers
open
> > > for anonymous write are quickly misused.
> >
> > Proftpd, at least, has some great options to make this less likely.
> > Preventing MKDIR and LIST (and maybe RETR), for example, in the
incoming
> > directory makes it a lot more safe.
> >
> > w
>
> Yes, I use such kind of a setup with both Proftpd and Pure-FTPd which
> makes uploads invisible in the incoming area as soon as the upload
> finished. The public area is just download enabled.
Me too (proftpd). I occasionally get files dumped in /incoming but the
poor kiddies can't download it from anywhere :-)
What the OP probably needs to do is:
# chcon -R -t ftpd_anon_rw_t /path/to/upload/directory
(see "man ftpd_selinux").
Paul.
--
Paul Howarth <paul at city-fan.org>
------------------------------
Message: 6
Date: Fri, 29 Jul 2005 08:09:05 +0100
From: Paul Howarth <paul at city-fan.org>
Subject: Re: Yum failing me...
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <1122620945.2851.89.camel at laurel.intra.city-fan.org>
Content-Type: text/plain
On Thu, 2005-07-28 at 16:25 -0400, Tony Nelson wrote:
> At 6:26 PM +0300 7/28/05, Dotan Cohen wrote:
> >...Tell me, how carefully watched are the people who maintain
> >packages in, say, extras? Can these repros really be trusted in that
> >sense? I guess that I am, in a way, letting the maintainers of the
> >repros add anything that they like to my system- I don't have the
> >knowledge to go over every last package, and as a home user, I do not
> >plan on aquiring that knowledge.
>
> Put another way, are there any known cases where a packager for a
major
> distro or repo has acted with malicious intent? (I'm also curious
about
> this.)
Not that I know of, but I do recall issues with the ftp servers for
major bits of software being compromised and the source code being
tampered with there. That's why it's a good idea always to check GPG
signatures when provided for tarballs you may download.
Paul.
--
Paul Howarth <paul at city-fan.org>
------------------------------
Message: 7
Date: Fri, 29 Jul 2005 10:12:52 +0300
From: Dotan Cohen <dotancohen at gmail.com>
Subject: Prelink eating all my resources
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <880dece00507290012694dc9d7 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hi list,
Once again my FC4 box (Duron 1200mHz, 512 ram) has crawled to a halt.
I quickly top'ed and found a process prelink that varied between
74%-98% CPU usage.
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
5202 root 39 19 11724 9280 536 R 89.9 1.9 0:23.59 prelink
So I googled for prelink and now know that it helps preload libraries
so that progreams can start faster. Which is senseable because the
machine started slowing down when I clicked 'manage bookmarks' in
firefox, which opens another program. My question is, what can I do to
prevent this from happening again? Do I have to ust cross my fingers
every time I open a new program?
Could this be related to the fact that I have no swap partition? I
know that I should probably add one, I guess that I've just been too
lazy to learn how. Will adding a swap partition make the machine less
sluggish? For this 512 ram machine, I was thinking of adding a 2 gig
swap partition.
Dotan
http://lyricslist.com/lyrics/artist_albums/60/basil_toni.php
Basil, Toni Song Lyrics
------------------------------
Message: 8
Date: Fri, 29 Jul 2005 03:17:44 -0400 (EDT)
From: Peter Teuben <teuben at astro.umd.edu>
Subject: Re: Prelink eating all my resources
To: Dotan Cohen <dotancohen at gmail.com>, For users of Fedora Core
releases <fedora-list at redhat.com>
Message-ID:
<Pine.LNX.4.50.0507290315080.1858-100000 at grus.astro.umd.edu>
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Fri, 29 Jul 2005, Dotan Cohen wrote:
> Hi list,
> Once again my FC4 box (Duron 1200mHz, 512 ram) has crawled to a halt.
> I quickly top'ed and found a process prelink that varied between
> 74%-98% CPU usage.
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 5202 root 39 19 11724 9280 536 R 89.9 1.9 0:23.59 prelink
>
> So I googled for prelink and now know that it helps preload libraries
> so that progreams can start faster. Which is senseable because the
> machine started slowing down when I clicked 'manage bookmarks' in
> firefox, which opens another program. My question is, what can I do to
> prevent this from happening again? Do I have to ust cross my fingers
> every time I open a new program?
>
> Could this be related to the fact that I have no swap partition? I
> know that I should probably add one, I guess that I've just been too
> lazy to learn how. Will adding a swap partition make the machine less
> sluggish? For this 512 ram machine, I was thinking of adding a 2 gig
> swap partition.
I've also notices that on occasion i have a similar (but not prelink)
"problem": the machine is crawling to a halt, the load can go up
like crazy (10 or 20) briefly and return to normal after a while. I am
doing things that take resources, e.g. once i was loading big (1kx2k)
images using xv, and another time compiling a large project. To me
it seemed as if it was not able to figure out how to efficiently manage
the swap. Overal, i'm not impressed with my new FC4system (which
ran RH9 quite allright before).
peter
------------------------------
Message: 9
Date: Fri, 29 Jul 2005 08:18:45 +0100
From: Paul Howarth <paul at city-fan.org>
Subject: Re: Uninstalling exim (when turning it off is not enough)
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <1122621525.2851.91.camel at laurel.intra.city-fan.org>
Content-Type: text/plain
On Thu, 2005-07-28 at 19:29 -0400, neidorff wrote:
> On 7/28/05, Paul Howarth <paul at city-fan.org> wrote:
> > On Wed, 2005-07-27 at 21:07 -0400, neidorff wrote:
> > > On 7/27/05, Paul Howarth <paul at city-fan.org> wrote:
> > > > neidorff wrote:
> > > > >>>I'm sorry to give a flaky answer, but whatever pop server is
installed
> > > > >>>with qmailrocks. Courier does imap in this setup, I think it
also
> > > > >>>does pop. I did a manual login to the pop server
> > > > >>>(#telnet localhost 110)
> > > > >>>and was able to successfully log into my account and list my
mail. I
> > > > >>>assume that means that the pop server is working properly?
> > > > >>
> > > > >>It's at least working for localhost. It might not be listening
on other
> > > > >>interfaces.
> > > > >>
> > > > >>What's the output of:
> > > > >># netstat -lpn | grep 110
> > > > >
> > > > >
> > > > > tcp 0 0 0.0.0.0:110 0.0.0.0:*
> > > > > LISTEN 10652/tcpserver
> > > > >
> > > > > This tcpserver is the one that came with qmail (the
ucspi-tcp-0.88
> > > > > package). Its the only one on the system.
> > > >
> > > > The netstat output indicates that it's listening on all
interfaces, not
> > > > just localhost, so it should be usable from anywhere as long as
you
> > > > don't have a /etc/hosts.deny entry or firewall rule that is
blocking
> > > > access from anywhere else.
> > > >
> > > > Is your kmail configured to use the pop server on localhost?
> > > >
> > >
> > > Yes, kmail is configured to use the pop server on localhost. I
> > > thought about the firewall rule and turned it off, but got the
same
> > > error. The file /etc/hosts.deny is empty (just a few lines of
> > > comments).
> >
> > I've no idea why kmail can't do what you can do yourself with
telnet,
> > i.e. log in and look at your mail. What error message do you get?
> >
> > Paul.
> > --
>
> The error is: "Could not start process POP3."
I think it's probably worth trying a kmail list for this. I don't use
kmail myself so I don't know if this is an underlying issue with your
POP server (which I doubt) or a kmail configuration error.
Paul.
--
Paul Howarth <paul at city-fan.org>
------------------------------
Message: 10
Date: Fri, 29 Jul 2005 08:25:26 +0100
From: Paul Howarth <paul at city-fan.org>
Subject: Re: yum-daily.yum - FC4
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <1122621926.2851.95.camel at laurel.intra.city-fan.org>
Content-Type: text/plain
On Thu, 2005-07-28 at 19:49 -0700, linux wrote:
> Does anyone know what the yum-daily.yum file does? It's in the
/etc/yum
> directory, and is called by"yum-daily.yum" the daily yum cron job
> in /etc/cron.daily/yum.
>
> I can't find a man page or a faq or a howto anywhere which explains
this
> file. It's new for FC4
>
> It has three lines:
>
> update
> ts run
> exit
>
> I can see update prompting a "yum update"
> but I can't figure out "ts run" - is it a test run?
No, it's a "transaction set" run. These are yum shell commands - yum has
its own shell that you can access using "yum shell".
$ yum shell
Setting up Yum Shell
> help
commands: clean, config, exit, groupinfo, groupinstall, grouplist,
groupremove, groupupdate, info, install, list,
localinstall, makecache, provides, quit, remove,
repo, run, search, transaction, update
> help ts
ts arg
list: lists the contents of the transaction
reset: reset (zero-out) the transaction
solve: run the dependency solver on the transaction
run: run the transaction
> exit
Leaving Shell
> I assume "exit" gets out of the yum process.
Yes.
Paul.
--
Paul Howarth <paul at city-fan.org>
------------------------------
Message: 11
Date: Fri, 29 Jul 2005 10:26:46 +0300
From: Dotan Cohen <dotancohen at gmail.com>
Subject: Re: Prelink eating all my resources
To: Peter Teuben <teuben at astro.umd.edu>
Cc: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <880dece005072900264d1e132d at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On 7/29/05, Peter Teuben <teuben at astro.umd.edu> wrote:
> I've also notices that on occasion i have a similar (but not prelink)
> "problem": the machine is crawling to a halt, the load can go up
> like crazy (10 or 20) briefly and return to normal after a while. I am
> doing things that take resources, e.g. once i was loading big (1kx2k)
> images using xv, and another time compiling a large project. To me
> it seemed as if it was not able to figure out how to efficiently
manage
> the swap. Overal, i'm not impressed with my new FC4system (which
> ran RH9 quite allright before).
>
> peter
>
Yeah, I didn't want to be a jerk about it, but in other OS's,
including FC3, the machine was real snappy. FC4 is by far the most
sluggish OS that I've tried, but as I haven't set up a swap partition,
I did not want to blame FC4 just yet. But I know that a lot of people
complain that is is sluggish.
Side note: what is the general opinion about disabling CUPS, so that
it will not start up when I start the computer? I don't have a
printer, and it also seems like a resource hog.
Dotan
http://lyricslist.com/lyrics/artist_albums/346/michael_george.php
Michael, George Song Lyrics
------------------------------
Message: 12
Date: Fri, 29 Jul 2005 13:03:03 +0530
From: Anil Kumar Sharma <xplusaks at gmail.com>
Subject: Re: kde kicker crashes
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <52fe6b68050729003376ec6044 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I also face this kicker crash but not concluded yet if it is control
center
changes or smething else. Now onwards I will take particular note.
On 7/29/05, Richard Humphrey <rlhumphrey at gmail.com> wrote:
>
> I see the same prob on laptop running FC3. Kicker crashes when I go to
log
> out.
>
> On 7/27/05, kevin.kempter at dataintellect.com <
> kevin.kempter at dataintellect.com> wrote:
> >
> > I see the same issue on my laptop running FC4
> >
> >
> >
> > > --- BRUCE STANLEY <bruce.stanley at prodigy.net> wrote:
> > > > I have been having kicker crashes now and then
> > > > on FC4 when using the KDE desktop.
> > > >
> > > > It seems to occur whenever I run the 'Control Center'
> > > > program to change things.
> > > >
> > > > Example: use control center to change the stye and
> > > > colors used by KDE.
> > > >
> > > > Then changes take effect ok, but when I
> > > > log out, the kicker crash occurs.
> > > >
> > > > When I log back in, all the changes I made
> > > > are still there and KDE acts like nothing
> > > > ever happen.
> > > >
> > > > I have applied all the kde updates
> > > > (e.g kdebase, kdelib, kdegraphics), arts and alsa
> > > > updates, and the xorg updates found on the FC4
> > > > download site.
> > > >
> > > > Note: other types of changes can be made in the
> > > > control center, and kicker crashes may
> > > > also occur.
> > > >
> > > > Has anyone else been having problems with kicker?
> > > >
> > > >
> > > > ps: yes I re-created my ~/.kde dir after updates
> > > > were applied.
> > >
> > > 2ND-POST:
> > > Am I to conclude that no one besides Chris and myself are having
> > > problems with the KDE kicker crashing?
> >
> > --
> > fedora-list mailing list
> > fedora-list at redhat.com
> > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> >
>
>
>
> --
> Richard Humphrey
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
>
--
Anil Kumar Shrama
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://www.redhat.com/archives/fedora-list/attachments/20050729/6162952
8/attachment.htm
------------------------------
Message: 13
Date: Fri, 29 Jul 2005 09:04:36 +0100
From: Neil Marjoram <n.marjoram at adastral.ucl.ac.uk>
Subject: Shock system lockup!
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <42E9E314.6000400 at adastral.ucl.ac.uk>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Can anyone help? I have had my system lockup twice now in the last week,
I am most shocked! Both occasions the system has blown out my X session,
and then locked completly forcing me to hard reset the system. I cannot
reproduce the error, the only apps I was using are Thunderbird, Firefox
and terminal I am using KDE. Linux tux 2.6.12-1.1398_FC4smp #1 SMP Fri
Jul 15 01:05:24 EDT 2005 x86_64 x86_64 x86_64 GNU/Linux
The system is a Tyan twin AMD opteron 64 system (2.6Ghz) with 2 GB ram.
The system is upto date with patches.
Any help would be appreciated.
Thanks,
Neil.
/var/log/messages output :
Jul 29 08:43:51 tux kernel: Debug: sleeping function called from invalid
context
at include/linux/rwsem.h:43
Jul 29 08:43:51 tux kernel: in_atomic():0, irqs_disabled():1
Jul 29 08:43:51 tux kernel:
Jul 29 08:43:51 tux kernel: Call Trace: <#MC>
<ffffffff8013abd5>{profile_task_exit+21} <ffffffff8013bff2>{do_exit+34}
Jul 29 08:43:51 tux kernel:
<ffffffff801165c7>{do_machine_check+871}
<ffffffff8010fc7f>{machine_check+127}
Jul 29 08:43:51 tux kernel: <EOE>
Jul 29 08:43:51 tux artsd: nss_ldap: reconnecting to LDAP server...
Jul 29 08:43:51 tux gconfd (user-3463): Received signal 15, shutting
down cleanly
Jul 29 08:43:51 tux gdm[3241]: gdm_slave_xioerror_handler: Fatal X error
- Restarting :0
Jul 29 08:43:51 tux gdm(pam_unix)[3241]: session closed for user
neilmarj
Jul 29 08:43:51 tux artsd: nss_ldap: reconnected to LDAP server after 1
attempt(s)
Jul 29 08:43:51 tux gconfd (user-3463): Exiting
Jul 29 08:43:51 tux su(pam_unix)[4944]: session closed for user root
Jul 29 08:44:04 tux gdm(pam_unix)[7884]: session opened for user user by
(uid=0)
Jul 29 08:44:08 tux kded [kdeinit]: nss_ldap: reconnecting to LDAP
server...
Jul 29 08:44:08 tux kded [kdeinit]: nss_ldap: reconnected to LDAP server
after 1 attempt(s)
Jul 29 08:44:11 tux artsd: nss_ldap: reconnecting to LDAP server...
Jul 29 08:44:11 tux artsd: nss_ldap: reconnected to LDAP server after 1
attempt(s)
Jul 29 08:44:11 tux gpm[2780]: *** info [mice.c(1766)]:
Jul 29 08:44:11 tux gpm[2780]: imps2: Auto-detected intellimouse PS/2
Jul 29 08:44:12 tux gconfd (user-8098): starting (version 2.10.0), pid
8098 user 'user'
Jul 29 08:44:13 tux gconfd (user-8098): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at position 0
Jul 29 08:44:13 tux gconfd (user-8098): Resolved address
"xml:readwrite:/home/neilmarj/.gconf" to a writable configuration source
at position 1
Jul 29 08:44:13 tux gconfd (user-8098): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source at position 2
Jul 29 08:44:29 tux /sbin/mingetty[3017]: tty1: invalid character 0x1b
in login name
Jul 29 08:44:34 tux shutdown: shutting down for system halt
Jul 29 08:44:35 tux init: Switching to runlevel: 0
Jul 29 08:44:35 tux shutdown: shutting down for system halt
Jul 29 08:44:36 tux gdm(pam_unix)[7884]: session closed for user user
Jul 29 08:44:36 tux xfs[2872]: terminating
Jul 29 08:44:36 tux rpc.mountd: Caught signal 15, un-registering and
exiting.
Jul 29 08:44:37 tux gconfd (user-8098): Received signal 15, shutting
down cleanly
Jul 29 08:44:37 tux gconfd (user-8098): Exiting
Jul 29 08:46:10 tux syslogd 1.4.1: restart.
--
Neil Marjoram
Systems Manager
Adastral Park Campus
University College London
Ross Building
Adastral Park
Martlesham Heath
Ipswich - Suffolk
IP5 3RE
Reclaim Your Inbox!
http://www.mozilla.org/products/thunderbird
------------------------------
Message: 14
Date: Fri, 29 Jul 2005 03:10:07 -0500
From: Bob Gustafson <bobgus at rcn.com>
Subject: Re: sound problem with Dell 510m - also Gateway Solo 2150
To: Alexander Dalloz <ad+lists at uni-x.org>
Cc: fedora-list at redhat.com
Message-ID: <v04020a01bf0f92e66ac6@[192.168.49.19]>
Content-Type: text/plain; charset="us-ascii"
Sorry about that. The sound.bug file was a text file. See listing at the
enf of this message
On Thu, 28 Jul 2005 23:59:36 +0200, Alexander Dalloz wrote:
>Am Do, den 28.07.2005 schrieb Bob Gustafson um 23:30:
>
>> I saw your email to julien bossart <julienfedora at gmail.com> asking
for more
>> diagnostic information.
>>
>> I have a similar problem (no sound) with my Gateway Solo 2150. It is
>> currently running FC4 and is up2date as of last night.
>>
>> The attachment includes info on the chip (Creative Labs), all of the
>> commands you asked Julien to send, and also output from alsomixer
which
>> thinks it is an Ensoniq (maybe can be both..)
>
>Creative Labs places Ensoniq chips on some of their card models. See
the
>soundcard matrix at
>
>http://www.alsa-project.org/alsa-doc/index.php?vendor=vendor-Creative_L
abs#matr
>ix
>
>to get some info about which driver is used by ALSA for which card
model
>and which cards have support.
>
>> Hope this is useful.
>
>Not really, please see:
>
>$ file /home/adalloz/sound.bug
>/home/adalloz/sound.bug: BinHex binary text, version 4.0
>
>Please attach such information in a plain text format. At least I have
>no way to check the content of the "sound.bug" file.
>
>> Bob Gustafson
>
>Alexander
>
>
>--
>Alexander Dalloz | Enger, Germany | GPG http://pgp.mit.edu 0xB366A773
>legal statement: http://www.uni-x.org/legal.html
>Fedora Core 2 GNU/Linux on Athlon with kernel 2.6.11-1.35_FC2smp
>Serendipity 23:55:45 up 13 days, 4:28, load average: 0.39, 0.23, 0.19
>
>Content-Type: application/pgp-signature; name=signature.asc
>Content-Description: Dies ist ein digital signierter Nachrichtenteil
Following is 'sound.bug'
The computer is:
Gateway Solo 2150 laptop
The sound card is:
Creative Labs Ectiva EV1938
driver snd-ens1371
Output of requested commands:
/sbin/lspci -v
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4100000-f5ffffff
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
01)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at 10f0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev
01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at 1060 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
00:08.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Gateway 2000: Unknown device 2150
Flags: bus master, medium devsel, latency 168, IRQ 9
Memory at 0a000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 0a400000-0a7ff000 (prefetchable)
Memory window 1: 0a800000-0abff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:08.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Gateway 2000: Unknown device 2150
Flags: bus master, medium devsel, latency 168, IRQ 9
Memory at 0a001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 0ac00000-0afff000 (prefetchable)
Memory window 1: 0b000000-0b3ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00:09.0 Multimedia audio controller: Creative Labs Ectiva EV1938
Subsystem: Gateway 2000: Unknown device 2150
Flags: bus master, slow devsel, latency 96, IRQ 5
I/O ports at 1080 [size=64]
I/O ports at 10c0 [size=32]
Capabilities: [dc] Power Management version 1
00:0a.0 Communication controller: Agere Systems (former Lucent
Microelectronics) WinModem 56k (rev 01)
Subsystem: Actiontec Electronics Inc: Unknown device 2200
Flags: medium devsel, IRQ 3
Memory at f4000000 (32-bit, non-prefetchable) [size=256]
I/O ports at 10e0 [size=8]
I/O ports at 1400 [size=256]
Capabilities: [f8] Power Management version 2
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M
AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Gateway 2000: Unknown device 2150
Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 2000 [size=256]
Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] AGP version 1.0
Capabilities: [5c] Power Management version 1
06:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless
LAN Controller (rev 03)
Subsystem: Dell: Unknown device 0004
Flags: bus master, fast devsel, latency 64, IRQ 9
Memory at 0b000000 (32-bit, non-prefetchable) [size=8K]
cat /etc/modprobe.conf
alias snd-card-0 snd-ens1371
options snd-card-0 index=0
options snd-ens1371 index=0
remove snd-ens1371 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-ens1371
alias usb-controller uhci-hcd
alias eth0 pegasus
alias wlan0 ndiswrapper
/sbin/lsmod
Module Size Used by
pegasus 26833 0
mii 5441 1 pegasus
parport_pc 28933 1
lp 13001 0
parport 40585 2 parport_pc,lp
autofs4 29253 2
rfcomm 42333 0
l2cap 30661 5 rfcomm
bluetooth 56133 4 rfcomm,l2cap
sunrpc 167813 1
pcmcia 29025 4
ipt_REJECT 5569 1
ipt_state 1857 2
ip_conntrack 41497 1 ipt_state
iptable_filter 2881 1
ip_tables 19393 3 ipt_REJECT,ipt_state,iptable_filter
md5 4033 1
ipv6 267841 12
yenta_socket 21449 3
rsrc_nonstatic 12737 1 yenta_socket
pcmcia_core 50909 3 pcmcia,yenta_socket,rsrc_nonstatic
uhci_hcd 35153 0
ltserial 14256 2
ltmodem 567312 1 ltserial
i2c_piix4 8657 0
i2c_core 21569 1 i2c_piix4
snd_ens1371 31649 1
gameport 18633 1 snd_ens1371
snd_rawmidi 30305 1 snd_ens1371
snd_ac97_codec 75961 1 snd_ens1371
snd_seq_dummy 3653 0
snd_seq_oss 37057 0
snd_seq_midi_event 9153 1 snd_seq_oss
snd_seq 62289 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8781 4
snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 51185 0
snd_mixer_oss 17857 1 snd_pcm_oss
snd_pcm 100169 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_timer 33605 2 snd_seq,snd_pcm
snd 57157 12
snd_ens1371,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_devic
e,snd_pc
m_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10913 1 snd
snd_page_alloc 9669 1 snd_pcm
ndiswrapper 160236 0
floppy 65141 0
dm_snapshot 17413 0
dm_zero 2113 0
dm_mirror 26157 0
ext3 132681 2
jbd 86233 1 ext3
dm_mod 58101 6 dm_snapshot,dm_zero,dm_mirror
***** Some extra commands and output *****
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371
DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
PCM list:
hw {
@args.0 CARD
@args.1 DEV
@args.2 SUBDEV
@args.CARD {
type string
default {
@func getenv
vars {
0 ALSA_PCM_CARD
1 ALSA_CARD
}
default {
@func refer
name 'defaults.pcm.card'
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars {
0 ALSA_PCM_DEVICE
}
default {
@func refer
name 'defaults.pcm.device'
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name 'defaults.pcm.subdevice'
}
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
plughw {
@args.0 CARD
@args.1 DEV
@args.2 SUBDEV
@args.CARD {
type string
default {
@func getenv
vars {
0 ALSA_PCM_CARD
1 ALSA_CARD
}
default {
@func refer
name 'defaults.pcm.card'
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars {
0 ALSA_PCM_DEVICE
}
default {
@func refer
name 'defaults.pcm.device'
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name 'defaults.pcm.subdevice'
}
}
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
}
plug {
@args.0 SLAVE
@args.SLAVE {
type string
}
type plug
slave.pcm $SLAVE
}
shm {
@args.0 SOCKET
@args.1 PCM
@args.SOCKET {
type string
}
@args.PCM {
type string
}
type shm
server $SOCKET
pcm $PCM
}
tee {
@args.0 SLAVE
@args.1 FILE
@args.2 FORMAT
@args.SLAVE {
type string
}
@args.FILE {
type string
}
@args.FORMAT {
type string
default raw
}
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
}
file {
@args.0 FILE
@args.1 FORMAT
@args.FILE {
type string
}
@args.FORMAT {
type string
default raw
}
type file
slave.pcm null
file $FILE
format $FORMAT
}
null {
type null
}
cards 'cards.pcm'
front 'cards.pcm.front'
rear 'cards.pcm.rear'
center_lfe 'cards.pcm.center_lfe'
side 'cards.pcm.side'
surround40 'cards.pcm.surround40'
surround41 'cards.pcm.surround41'
surround50 'cards.pcm.surround50'
surround51 'cards.pcm.surround51'
surround71 'cards.pcm.surround71'
iec958 'cards.pcm.iec958'
spdif 'cards.pcm.iec958'
modem 'cards.pcm.modem'
default 'cards.pcm.default'
dmix 'cards.pcm.dmix'
dsnoop 'cards.pcm.dsnoop'
----
------------------------------
--
fedora-list mailing list
fedora-list at redhat.com
http://www.redhat.com/mailman/listinfo/fedora-list
End of fedora-list Digest, Vol 17, Issue 344
********************************************
More information about the fedora-list
mailing list