[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

nvidia dual DVI out - crash



Hi,

I've got an issue with my nvidia 6600GT (PCIe) on FC4.
I run it using two TFT monitors which I used to drive using VGA output and 
that worked well using the two monitors. Now I've switched to DVI output/
This works, but only if I do the following :

1) start PC with a configuration for driver nv (xorg driver)
2) copy my xorg.conf for the nvidia driver back to xorg.conf
3) restart X

If I just put my xorg.conf in place the PC will hang as soon as X starts 
(remote login not available anymore, just reset is left).
The above strange sequence works stable.
I've tried the 7174 and 7664 nvidia driver, both with the same result.

Anyone knows why this crash may occur ?

xorg.conf is attached below.

Regards,
Marcel Janssen


# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "off"
	Option	    "Clone" "off"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "v4l"
#	Load  "GLcore"
	Load  "record"
	Load  "freetype"
	Load  "type1"
#	Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Philips 107B(17inch/CM6800)"
	HorizSync    27.0 - 63.9
	VertRefresh  50.0 - 60.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Philips 107B(17inch/CM6800)"
	HorizSync    27.0 - 63.9
	VertRefresh  50.0 - 60.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard Vendor"
	BoardName   "NVIDIA GeForce 6600 GT"
	BusID       "PCI:5:0:0"
	Option "TwinView"
	Option "IgnoreDisplayDevices" "TV"
	Option "SecondMonitorHorizSync" "27 - 63.9"
        Option "SecondMonitorVertRefresh" "50 - 60"
	Option "TwinViewOrientation" "RightOf"
	Option "MetaModes" "1280x1024, 1280x1024"
	Option "ConnectedMonitor" "DFP-0, DFP-1"
EndSection

Section "Screen"
       Identifier   "Screen0"
       Device       "Videocard0"
       Monitor      "Monitor0"
       DefaultDepth    24
       Option "MetaModes" "1280x1024,1280x1024"
       Subsection "Display"
               Depth       24
               Modes       "1280x1024"
       EndSubsection
EndSection


#Section "DRI"
#	Group        0
#	Mode         0666
#EndSection






[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]