Access Point problem

[Claude Jones]

Scot L. Harris wrote:

> 
> The two addresses you give are in two different subnets.  Most APs I
> have seen default to the first address in the subnet defined on the LAN
> side.  In you case you might try 192.168.2.1 as the address oof the AP.
> 
> Or if it is following what you indicate the default should be try
> 192.168.2.50.
> 
> Baring that you will have to see about a hard reset which should reset
> the device back to factory defaults at which point the address should be
> 192.168.0.50 and have the default password info.
> 
> Normally there is a reset button, small hole with a switch that you
> reach with a paperclip reset device.  
> 

Thanks for your help, Scot. I think I covered your points in my previous 
  reply to Rick.

-- 
Claude Jones
Bluemont, VA, USA