Anaconda: i/o error during read on /dev/hda
Crisler, Jon
JCrisler at corvis.com
Fri Mar 25 16:12:32 UTC 2005
Peter, that machine is over 10 years old. I think you are running into
a problem where the Compaq BIOS is only barely able to function with
that hard drive. Perhaps you are using a disk manager software to fake
out the drive on the machine? Or there might be some disk management
software still lying around altering an old Windows MBR? I actually
spent a good portion of time looking into your problem, until I saw the
machine in question. I used to support many hundreds of that style of
Compaq, and they did have a lot of problems dealing with larger hard
drives, since 250mb to 1-2gb drives were the norm for that era, IIRC.
There used to be a company that would provide updated BIOS chips for
that line, but I am sure that product is long gone.
My advice would be to take the PC out onto the field and beat it with a
baseball bat, like in the movie "Office Space". Seriously, don't waste
your time. Go out and look for something like a 733mhz to 1 ghz Compaq,
Dell, HP whatever, perhaps without a hard drive. You should be able to
pick one up almost for free, or maybe $50. Transfer the HD to the
replacement machine, and your problems are solved.
Regarding the hard drive, Samsung lists a few freebees that will
diagnose the hard drive for problems, although I doubt you have any with
the drive itself. There is no firmware update for that drive as well.
http://erms.samsungusa.com/customer/sea/jsp/faqs/faqs_view.jsp?PG_ID=1&A
T_ID=5539&PROD_SUB_ID=26&PROD_ID=-1
-----Original Message-----
From: fedora-list-bounces at redhat.com
[mailto:fedora-list-bounces at redhat.com] On Behalf Of Peter Gloor
Sent: Friday, March 25, 2005 9:33 AM
To: For users of Fedora Core releases
Subject: Re: Anaconda: i/o error during read on /dev/hda
Below is some information about my current (SuSE) config. Take a look at
the
various values concerning the drive geometry (CHS, Sects, LBA etc).
Based on the fact that I had similar issues with SuSE (I've got solved
years
ago) I'm quite sure the problem is that Fedora (Anaconda) uses wrong
drive
geometry values (probably due to misleading information from the BIOS)
and
therefore cannot read the partition data.
Remember, my problem is, how can I get started and make Fedora (or
Anaconda
or whatever causes the problem) using the correct drive geometry values,
so
it will access my disk properly.
-----------------------------------
leda:/home/peter # hdparm -iv /dev/hda
/dev/hda:
multcount = 16 (on)
I/O support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 82796/15/63, sectors = 78242976, start = 0
Model=SAMSUNG SV4002H, FwRev=QP100-07, SerialNo=0413J1FT515266
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=38997, SectSize=619, ECCbytes=4
BuffType=DualPortCache, BuffSize=1945kB, MaxMultSect=16, MultSect=16
CurCHS=17475/15/63, CurSects=-78446341, LBA=yes, LBAsects=78242976
IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
AdvancedPM=no
Drive Supports : fastATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6
Kernel Drive Geometry LogicalCHS=82796/15/63 PhysicalCHS=82796/15/63
-----------------------------------
leda:/home/peter # scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x1595
VIA Device unknown
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x100b device 0x0020
NS Device unknown
pci bus 0x0000 cardnum 0x04 function 0x00: vendor 0x0e11 device 0xae34
Compaq Netellignet 10
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x1106 device 0x0586
VIA VT 82C586 MVP3 ISA Bridge
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x1106 device 0x0571
VIA VT 82C586 MVP3 IDE Bridge
pci bus 0x0000 cardnum 0x07 function 0x02: vendor 0x1106 device 0x3038
VIA VT 82C586 MVP3 USB Controller
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x1106 device 0x3040
VIA VT 82C586B MVP3 ACPI Bridge
pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x5333 device 0x8901
S3 Trio64V2/DX or /GX
leda:/etc #
-----------------------------------
in /etc/sysconfig/bootloader:
-----------------------------------
# Does the BIOS support LBA access.
#
LILO_LBA="yes"
-----------------------------------
-----------------------------------
in /etc/lilo.conf:
-----------------------------------
boot = /dev/hda
change-rules
reset
read-only
menu-scheme = Wg:kw:Wg:Wg
lba32
prompt
timeout = 80
message = /boot/message
image = /boot/vmlinuz
label = linux
root = /dev/hda2
vga = 791
initrd = /boot/initrd
append = "ide=nodma apm=off acpi=off"
image = /boot/vmlinuz.suse
label = failsafe
root = /dev/hda2
vga = 791
initrd = /boot/initrd.suse
append = "ide=nodma apm=off acpi=off"
optional
image = /boot/memtest.bin
label = memtest86
-----------------------------------
-----------------------------------
in /etc/fstab:
-----------------------------------
/dev/hda2 / reiserfs defaults 1 2
/dev/hda3 /data3 reiserfs defaults 1 2
/dev/hda5 /local reiserfs defaults 1 2
/dev/hda6 /data6 reiserfs defaults 1 2
/dev/hda7 /netusr reiserfs defaults 1 2
devpts /dev/pts devpts defaults 0 0
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
proc /proc proc defaults 0 0
/dev/hda1 swap swap pri=42 0 0
-----------------------------------
Isn't this fun, just like searching easter eggs?
Happy Easter!
Peter
----- Original Message -----
From: "Peter Gloor" <pgloor at gmx.net>
To: <fedora-list at redhat.com>
Sent: Thursday, March 24, 2005 10:20 PM
Subject: Anaconda: i/o error during read on /dev/hda
> Hello NG,
>
> Hmm, how to explain my problem? To make it short, I have a SuSE Linux
8.0
> Professional installed on a Compaq Deskpro 2000 5166 MMX with a 40GB
HDD
> (Samsung SV4002H) and need to update to a newer kernel. At the same
time I
> wanted to switch from SuSE to Fedora Core 3.
>
> My HDD is devided into several partitions. One for the linux system
> inclusive the standard packages, one for non-standard applications I
use
> (e.g. Lotus Domino) and one for data. Now, while keeping the data
> partition, I simply wanted to reformat my existing linux partition and
> install Fedora from scratch into the empty space I get.
>
> This is where the problem is. After starting from the first Fedora
Core 3
> CD and having selected the installation language, Anaconda pops up a
> dialog with the message "Input/Output error during read on /dev/hda".
> Regardless of what I'm trying to do (booting with params, rescue cd,
etc)
> I'm unable to reformat or recreate the partitions without loosing my
data.
>
> However, even my SuSE installation has beed running for years (I
startet
> with SuSE Linux 6.x), I remember that I had a lot of problems with my
40GB
> HDD until I reinstalled anything. When I reinstalled SuSE Linux I had
to
> manually change some drive geometry settings to overcome the problem
that
> SuSE did not properly calculate drive geometry settings (LDA/CHS etc
?)
> due to a problem that the BIOS reported wrong or misleading
information.
> After I fixed this every thing was o.k.
>
> Now, I'm quite sure that Fedora has the same problem, but I don't know
how
> to get it fixed. I even don't remember how I did this one time action
in
> SuSE.
>
> I hope anybody has an Idea and can give me a hint how to get the
problem
> solved.
>
> Regards,
> Peter
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
--
fedora-list mailing list
fedora-list at redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
The information contained in this e-mail including any attachments may constitute Corvis Equipment Corporation Proprietary Information that is subject to Non-Disclosure Agreement and cannot be disclosed to any other party without the express consent of Corvis Corporation.
If you are neither the intended recipient of this e-mail nor responsible for delivering this e-mail to the intended recipient, note that any dissemination, distribution, copying, or retention of this e-mail is prohibited.
If you believe you have received this e-mail in error, we request that you notify the sender by return e-mail and then delete this e-mail and any return email immediately.
More information about the fedora-list
mailing list