network query; route command

[Shelagh Manton]

Paul Howarth wrote:

[stuff deleted]
>> 
>> [shelagh at pandorasbox shelagh]$ netstat -rn
>> Kernel IP routing table
>> Destination     Gateway         Genmask         Flags   MSS Window  irtt
>> Iface
>> 220.244.163.3   0.0.0.0         255.255.255.255 UH        0 0          0
>> ppp0
>> 192.168.32.0    192.168.32.3    255.255.255.0   UG        0 0          0
>> eth0
>> 192.168.32.0    0.0.0.0         255.255.255.0   U         0 0          0
>> eth0
>> 169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0
>> eth0
>> 127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0
>> lo
>> 0.0.0.0         220.244.163.3   0.0.0.0         UG        0 0          0
>> ppp0
>> 
[stuff deleted]
> 
> This all looks fine. You still didn't say which routes you wanted to add
> or delete. You can stop the zeroconf route appearing appearing by
> putting "NOZEROCONF=yes" in /etc/sysconfig/network; next time your
> machine reboots, it'll be gone.
> 
> Paul.
OK. I just wanted to add the 127.0.0.1 address as it said was a proper setup
in NAG. I saw the 127.0.0.0 address and thought maybe that I'd setup an
incorrect parameter at some earlier stage which worked but not optimally.
Do all the gateway settings seem OK? Mine is the machine with the
192.168.32.3 IP. My 2 sons machines are -.1 & -.2. Is this a bad idea?
Everything I've read suggests that I probably should be -.1 and they on
larger numbers. 

PS what's a zeroconf route. (exposing the depths of my ignorance here!)

Shelagh