Cant't write cd-rom's

Mon Mar 7 13:36:51 UTC 2005

Hi,

I have tryed to burn some cd's in fc3. Everytime K3B gives me the 
following error message. I have tryed this as user & as root.
Running kernel 2.6.10-1.770  & K3B v.0.11.14

Anyone who has any suggestions? I can see some errors about media, but I 
use this media on windows, and 3 cd's wich k3b refused to use i have now 
written on in windows.

Thanx
THT

--- K3B Debug output ---
System
-----------------------
K3b Version:0.11.14
KDE Version: 3.3.1-2.6.FC3 Red Hat
QT Version: 3.3.3

cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code 
version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 
1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 
JÃ¶rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in 
this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'Slimtype'
Identifikation : 'COMBO LSC-24081M'
Revision       : '3IM2'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1895168 = 1850 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   700 MB       
Total size:      804 MB (79:39.52) = 358464 sectors
Lout start:      804 MB (79:41/39) = 358464 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11834 (97:24/16)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 24
Manufacturer: SONY Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 1385
Forcespeed is OFF.
Speed set to 706 KB/s
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
/usr/bin/cdrecord: Success. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 30.796s timeout 200s
/usr/bin/cdrecord: OPC failed.
Writing  time:   31.722s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 
100%.
BURN-Free was never needed.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -dao 
driveropts=burnfree -eject -data -tsize=358464s -

mkisofs
-----------------------
358464
INFO: UTF-8 character encoding detected by locale settings.
 Assuming UTF-8 encoded filenames on source filesystem,
 use -input-charset to override.
  0.14% done, estimate finish Mon Mar  7 14:23:13 2005
  0.28% done, estimate finish Mon Mar  7 14:23:13 2005
  0.42% done, estimate finish Mon Mar  7 14:23:13 2005
  0.56% done, estimate finish Mon Mar  7 14:23:13 2005

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid Lost Season 1 Ep. 1 & 2 
-volset  -appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN 
TRUEG AND THE K3B TEAM -publisher  -preparer K3b - Version 0.11.14 
-sysid LINUX -volset-size 1 -volset-seqno 1 -sort 
/tmp/kde-root/k3b6GHf0b.tmp -rational-rock -hide-list 
/tmp/kde-root/k3biExW6a.tmp -full-iso9660-filenames -iso-level 2 
-path-list /tmp/kde-root/k3bFInVFa.tmp 
/root/.kde/share/apps/k3b/temp/dummydir0/