Technical problems

Alexander Dalloz ad+lists at uni-x.org
Sat Mar 26 23:32:48 UTC 2005


Am Sa, den 26.03.2005 schrieb Truls Gulbrandsen um 23:24:

> Hi again,
> I attach the complete report from smartctl.
> 
> Hopefully this one gives some meaning.  Thanks in advance.
> 
> Truls
> 
> 
> ______________________________________________________________________
> [root at localhost ~]# smartctl -a /dev/hda
> smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> === START OF INFORMATION SECTION ===
> Device Model:     IC25N030ATCS04-0
> Serial Number:    CSH305DAG9LNRB
> Firmware Version: CA3OA71A
> User Capacity:    30,005,821,440 bytes
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   5
> ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 3
> Local Time is:    Sat Mar 26 23:20:33 2005 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> 
> General SMART Values:
> Offline data collection status:  (0x00) Offline data collection activity
>                                         was never started.
>                                         Auto Offline Data Collection: Disabled.

The offline testing is off. I think you should enable this:

smartctl -o on /dev/hda
smartctl -S on /dev/hda  [ this one too ]

> Self-test execution status:      ( 118) The previous self-test completed having
>                                         the read element of the test failed.
> Total time to complete Offline
> data collection:                 ( 645) seconds.
> Offline data collection
> capabilities:                    (0x1b) SMART execute Offline immediate.
>                                         Auto Offline data collection on/off support.
>                                         Suspend Offline collection upon new
>                                         command.
>                                         Offline surface scan supported.
>                                         Self-test supported.
>                                         No Conveyance Self-test supported.
>                                         No Selective Self-test supported.
> SMART capabilities:            (0x0003) Saves SMART data before entering
>                                         power-saving mode.
>                                         Supports SMART auto save timer.
> Error logging capability:        (0x01) Error logging supported.
>                                         No General Purpose Logging support.

> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x000b   095   095   062    Pre-fail  Always       -       262153
>   2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
>   3 Spin_Up_Time            0x0007   152   152   033    Pre-fail  Always       -       1
>   4 Start_Stop_Count        0x0012   098   098   000    Old_age   Always       -       3586
>   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
>   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
>   8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
>   9 Power_On_Hours          0x0012   082   082   000    Old_age   Always       -       7956
>  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
>  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1004
> 191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       1
> 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       59
> 193 Load_Cycle_Count        0x0012   089   089   000    Old_age   Always       -       114657
> 194 Temperature_Celsius     0x0002   125   125   000    Old_age   Always       -       44 (Lifetime Min/Max 18/57)
> 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       73
> 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       1

^^^^^

1 sector fault

>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 30 58 e2 7a e1  Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552

> SMART Self-test log structure revision number 1
> Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
> # 1  Extended offline    Completed: read failure       60%      7954         24781646
> # 2  Extended offline    Completed: read failure       60%      7953         24781646

You did now run 2 tests which did no finish. The error sector is given.
You may check

http://smartmontools.sourceforge.net/BadBlockHowTo.txt

Alexander


-- 
Alexander Dalloz | Enger, Germany | GPG http://pgp.mit.edu 0xB366A773
legal statement: http://www.uni-x.org/legal.html
Fedora Core 2 GNU/Linux on Athlon with kernel 2.6.10-1.770_FC2smp 
Serendipity 23:59:04 up 9 days, 21:55, load average: 0.45, 0.44, 0.44 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20050327/8c4359f0/attachment-0001.sig>


More information about the fedora-list mailing list