Please read: sym0:0:0:phase change message problem!

[Patrick]

That might be so, but looking at the bugreport (and based on the system I've got running), something isn't right...

I've tried RHEL3 (ok), RHEL4 (problem), CentOS4 (problem), Fedora 2 (ok) and Fedora 3 (problem). As long as I stay with the right kernel version there isn't a single problem...

Regards,
Patrick

--- On Tue 05/10, Francois Romieu < romieu at fr.zoreil.com > wrote:
From: Francois Romieu [mailto: romieu at fr.zoreil.com]
To: patrickm at myway.com, fedora-test-list at redhat.com
Date: Wed, 11 May 2005 00:13:27 +0200
Subject: Re: Please read: sym0:0:0:phase change message problem!

Patrick <patrickm at myway.com> :
[...]
> People who are running a system using the sym53c8xx controler with SCSI
> drives, can't use FC3, FC4t1 or RHEL4 (kernel 2.6.9-5.EL). Also
> CentOS4.0 has the same problem, but that's a different story ;-)

$ /sbin/lspci -v -s 02:09.0
02:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26)
Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller
Flags: bus master, medium devsel, latency 144, IRQ 177
I/O ports at d000 [size=256]
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <available only to root>
$ /sbin/lsmod | grep sym
sym53c8xx 79577 12 
scsi_transport_spi 19521 1 sym53c8xx
scsi_mod 129801 4 sr_mod,sym53c8xx,scsi_transport_spi,sd_mod

Smoothly running a 2.6.11-1.14_FC3smp kernel (raid1 + p4 ht).

--
Ueimor


_______________________________________________
No banners. No pop-ups. No kidding.
Make My Way  your home on the Web - http://www.myway.com