HELP! iSCSI qla4010 HBA driver problems.

[Jimmy McMillan]

I've been working on getting the drivers from qlogic's website (QLA4010) 
to work on a Dell Poweredge 2800, with the newest kernel 2.6.11-27 with 
no luck.  My log's are getting filled with mailbox_command errors.  The 
drivers are compiled, and I can actually mount an iscsi device and 
read/write to it, but eventually (5-10 minutes) it will fail, and 
continuously give me the included errors.  I've contacted qlogic, and 
their response time has been far from satisfactory (I haven't heard from 
them in 5-6 days)

If anyone can help in anyway, please do... I'm dieing here ;)

scsi1: qla4xxx_mailbox_command: Trying to execute a mailbox request, 
while another one is interrupting
Service existing interrupt first
scsi1: qla4xxx_mailbox_command: **** FAILED, cmd = 00000069, sts = 
00000000 ****
0x00 mailbox[0]      = 0x00004000
0x04 mailbox[1]      = 0x00000001
0x08 mailbox[2]      = 0x00040002
0x0C mailbox[3]      = 0x00000010
0x10 mailbox[4]      = 0x00000001
0x14 mailbox[5]      = 0x00000000
0x18 mailbox[6]      = 0x00000000
0x1C mailbox[7]      = 0xFFFFAD37
0x20 flash_address   = 0x00057DFF
0x24 flash_data      = 0x000000FF
0x28 ctrl_status     = 0x00000040
0x2C nvram           = 0x00000008
0x38 req_q_in        = 0x00000000
0x3C rsp_q_out       = 0x00000000
0x50 ext_hw_conf     = 0x00001916
0x58 port_ctrl       = 0x00000C1F
0x5C port_status     = 0x0001C61D
0x80 req_q_out       = 0x00000000
0xE0 gp_out          = 0x00000003
0xE4 gp_in           = 0x0000000E
0xFC port_err_status = 0x00000000
scsi1: qla4extioctl_query_hba_iscsi_portal: MBOX_CMD_GET_FW_STATE failed 
w/ status 0000