Resovling FC3 Boot Messages
Matt Roth
mroth at imminc.com
Fri Nov 4 22:46:31 UTC 2005
I'm sorry to repost this, but it got scrubbed because it was in HTML
format the first time.
>On Thu, Nov 03, 2005 at 02:32:50PM -0500, Matt Roth wrote:
>
>
>>I am receiving some boot messages on my Fedora Core 3 machine that
>>concern me and I would like your help in identifying whether they are
>>actual problems or if they can be safely ignored. I captured the
>>messages by using 'Shift+Page Up' to page through the scroll buffer
>>prior to logging in and typing what I saw into an editor on another
>>machine. I looked for a way to capture these boot messages to file, but
>>I couldn't find one. Does anyone know of a way to do this?
>>
>>
>get a hold of: system-logviewer-0.9.11-1
>which was left out of FC4 but is in FC3. Also look in:
>/var/log/boot.log
>demsg will also list boot messages after you boot but has a limited
>buffer.
>
>
I am aware of the boot.log and dmesg. It looks like most, if not all,
of the information from the boot sequence is available through them. I
was just wondering if there is an easier way to obtain the actual
console output of the boot sequence than digging through multiple
sources and piecing it together.
Does system-logviewer perform this function?
>I have seen those cache messages before but don't know what they mean
>and have ignored them May be a mistake. I guess these are SATA
>drives. If they are your SATA configuration in the BIOS may be in
>error.
>
>
They are two SCSI drives configured in a RAID 1 (mirrored). The
controller is a PERC 4e/Si RAID controller.
>Does your NFS server respond immediately after you finish booting.If
>not there may be a response timeout occurring. You do have nfs and
>nfslock running on you server?
>
>
Yes and yes. I can manually mount the NFS server immediately after
logging in and both nfsd and lockd are running on the NFS server.
>smartd failures ususally come from misconfiguration of the conf file.
>
>
I will look into either disabling smartd or configuring it correctly.
Thank you for your response,
Matthew Roth
InterMedia Marketing Solutions
Software Engineer and Systems Developer
>>==================================================
>> Booting 'Fedora Core (2.6.12-1.1376_FC3smp)'
>>kernel direct mapping tables upto ffff810100000000 @8000-c000
>>root (hd0,1)
>>Filesystem type is ext2fs, partition type 0x83
>>kernel /vmlinuz-2.6.12-1.1376_FC3smp ro root=LABEL=/ quiet
>> [Linux-bzImage, setup=0x1e00, size=0x1a57fa]
>>initrd /initrd-2.6.12-1.1376_FC3smp.img
>> [Linux-initrd @ 0x37f07000, 0xe81c0 bytes]
>>
>>.
>>Decompressing Linux...done.
>>Booting the kernel.
>>Red Hat nash version 4.1.18.1 starting
>>sda: asking for cache data failed
>>sda: assuming drive cache: write through
>>sda: asking for cache data failed
>>sda: assuming drive cache: write through
>>INIT: version 2.85 booting
>>Setting default font (latarcyrheb-sun16): [ OK ]
>>
>> Welcome to Fedora Core
>> Press 'I' to enter interactive startup.
>>Starting udev: [ OK ]
>>Initializing hardware... storage network audio done [ OK ]
>>Configuring kernel parameters: [ OK ]
>>Setting clock (utc): Thu Nov 3 10:47:11 EST 2005 [ OK ]
>>Loading default keymap (us): [ OK ]
>>Setting hostname immlx16.imm1: [ OK ]
>>Checking root filesystem
>>/: clean, 28314/656000 files, 120710/1311297 blocks
>> [ OK ]
>>Remounting root filesystem in read-write mode: [ OK ]
>>Setting up Logical Volume Management: [ OK ]
>>Checking filesystems
>>/boot: clean, 40/32256 files, 20415/128520 blocks
>>/home: clean, 27/656000 files, 31389/1311297 blocks
>>/usr: clean, 179268/1310720 files, 1154593/2620595 blocks
>>/var: clean, 3815/6045696 files, 745141/12080872 blocks
>> [ OK ]
>>Mounting local filesystems: [ OK ]
>>Enabling local filesystem quotas: [ OK ]
>>Enabling swap space: [ OK ]
>>INIT: Entering runlevel: 3
>>Entering non-interactive startup
>>Starting sysstat: [ OK ]
>>Starting etherfabric [ OK ]
>>Checking for new hardware [ OK ]
>>Starting pcmcia: [ OK ]
>>Setting network parameters: [ OK ]
>>Bringing up loopback interface: [ OK ]
>>Bringing up eth2: [ OK ]
>>Bringing up eth3: [ OK ]
>>Starting system logger: [ OK ]
>>Starting kernel logger: [ OK ]
>>Starting irqbalance: [ OK ]
>>Starting portmap: [ OK ]
>>Starting NFS statd: [ OK ]
>>Starting RPC idmapd: [ OK ]
>>Mounting NFS filesystems: mount to NFS server 'XXX.XXX.XX.XX' failed:
>>server is
>>down.
>> [FAILED]
>>Mounting other filesystems: [ OK ]
>>Starting lm_sensors: [ OK ]
>>Starting automount: No Mountpoints Defined [ OK ]
>>Starting nifd...
>>Starting mDNSResponder... [ OK ]
>>Starting smartd: [FAILED]
>>Starting acpi daemon: [ OK ]
>>Starting cups: [ OK ]
>>Starting sshd: [ OK ]
>>ip_tables: (C) 2000-2002 Netfilter core team
>>Starting xinetd: [ OK ]
>>Starting NFS services: [ OK ]
>>Starting NFS quotas: [ OK ]
>>Starting NFS daemon: [ OK ]
>>Starting NFS mountd: [ OK ]
>>Starting vsftpd for vsftpd: [ OK ]
>>Starting sendmail: [ OK ]
>>Starting sm-client: [ OK ]
>>Starting console mouse services: [ OK ]
>>/etc/rc3.d/S90crond: line 13: /usr/local/bin/rename.ps.info.log: No such
>>file or
>>directory
>>Starting crond: [ OK ]
>>Starting xfs: [ OK ]
>>Starting anacron: [ OK ]
>>Starting atd: [ OK ]
>>Starting system message bus: [ OK ]
>>Starting cups-config-daemon: [ OK ]
>>Starting haldaemon: [ OK ]
>>==================================================
>>
>>The messages that concern me are:
>>
>>==========
>>sda: asking for cache data failed
>>sda: assuming drive cache: write through
>>sda: asking for cache data failed
>>sda: assuming drive cache: write through
>>----------
>>I have no idea what these mean, but they don't seem to cause any
>>problems with the operation of the machine. Can they be safely ignored
>>or should I try to resolve them (and if so, how)?
>>==========
>>Mounting NFS filesystems: mount to NFS server 'XXX.XXX.XX.XX' failed:
>>server is
>>down.
>> [FAILED]
>>----------
>>This is a strange one. The server (IP hidden for security) is up and
>>manually mounting it succeeds immediately after logging in. The mount
>>succeeds during boot about 5% of the time. Does anyone know what could
>>be causing it to fail the vast majority of the time?
>>==========
>>Starting smartd: [FAILED]
>>----------
>>Are there common causes for smartd failures? Should I just turn it off
>>or should I attempt to fix the configuration? The contents of my
>>smartd.conf file are as follows:
>>
>> [root at immlx16 ~]# cat /etc/smartd.conf
>> /dev/sda -H -m root at localhost.localdomain
>>==========
>>/etc/rc3.d/S90crond: line 13: /usr/local/bin/rename.ps.info.log: No such
>>file or
>>directory
>>Starting crond: [ OK ]
>>----------
>>A script was missing and this problem has been resolved.
>>==========
>>
>>If you need any more information to help me with a particular problem,
>>please don't hesitate to ask. I will be happy to provide it.
>>
>>
More information about the fedora-list
mailing list