azureus -- FC4

[Kam Leo]

On 4/30/06, David Timms <dtimms at bigpond.net.au> wrote:
> Robin Laing wrote:
> > Ed Greshko wrote:
> >> Gowri Satish Adimulam wrote:
> >>
> >>> I am trying to download some files using torrents ( using azureus
> >>> client)
> >>> but iam getting some error like ,
> >>> Distributed data base UDP port mapping ( NAT/firewalled).
> >>>
> >>> at below of azureus clientit is showing DHT firewalled  .
> >>> Any help is appreciated.
> >>
> >> Unblock both TCP and UDP traffic for the port listed under
> >> "Options/Connections".
> >
> > It could also be your ISP blocking that port.  You may have to try a
> > different port.  If you look at the Azureus WWW site, you will find the
> > answers to most of the questions.  Pretty good at explaining how to open
> > and test for working ports.
> If you are behind a NAT router (many home dsl/cable setups), it will
> likely be blocking all incoming traffic. You would need to set up a port
> forward for TCP and another for UDP for the port number you would like
> to use in azureus (anything above 10000 or so). Also, you would need to
> allow these same ports inbound through your FC4's iptables firewall via
> System Admin Security and Firewall.
>
> Then try the azureus firewall test to see if you succeeded :)
>
> DaveT.
>

Set your router to enable UPnP.