invisible cursor in FC5_64 on A8N-VM
Lonni J Friedman
netllama at gmail.com
Tue Aug 15 22:41:26 UTC 2006
Is there a reason why you're using the vesa X driver instead of nv or nvidia?
On 8/15/06, Dave Stevens <geek at uniserve.com> wrote:
> Hi,
>
> I tried to do a clean install of the FC5_64 respin and got a good install
> except for an invisible mouse cursor. I've googled and found advice to
> disable the hardware cursor in xorg.conf. But as far as I can see there is no
> reference to the hw cusor in xorg.conf, which is appended. Ideas?
>
> Dave
>
> __________________________________
>
> [dave at localhost X11]$ cat xorg.conf
>
> # Xorg configuration created by system-config-display
>
> Section "ServerLayout"
> Identifier "single head configuration"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
>
> # RgbPath is the location of the RGB database. Note, this is the name of the
> # file minus the extension (like ".txt" or ".db"). There is normally
> # no need to change the default.
> # Multiple FontPath entries are allowed (they are concatenated together)
> # By default, Red Hat 6.0 and later now use a font server independent of
> # the X server to render fonts.
> RgbPath "/usr/X11R6/lib/X11/rgb"
> ModulePath "/usr/X11R6/lib/modules"
> FontPath "unix/:7100"
> EndSection
>
> Section "Module"
> Load "dbe"
> Load "extmod"
> Load "fbdevhw"
> Load "record"
> Load "freetype"
> Load "type1"
> Load "glx"
> Load "dri"
> EndSection
>
> Section "InputDevice"
>
> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
> # Option "Xleds" "1 2 3"
> # To disable the XKEYBOARD extension, uncomment XkbDisable.
> # Option "XkbDisable"
> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults). For example, for a non-U.S.
> # keyboard, you will probably want to use:
> # Option "XkbModel" "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> # Option "XkbModel" "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> # Option "XkbLayout" "de"
> # or:
> # Option "XkbLayout" "de"
> # Option "XkbVariant" "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> # Option "XkbOptions" "ctrl:swapcaps"
> # Or if you just want both to be control, use:
> # Option "XkbOptions" "ctrl:nocaps"
> #
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "yes"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "LCD Panel 1280x1024"
> DisplaySize 340 270
> HorizSync 31.5 - 67.0
> VertRefresh 50.0 - 75.0
> Option "dpms"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "vesa"
> VendorName "Videocard vendor"
> BoardName "VESA driver (generic)"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 16
> SubSection "Display"
> Viewport 0 0
> Depth 16
>
> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
>
> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "DRI"
> Group 0
> Mode 0666
> EndSection
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman netllama at gmail.com
LlamaLand http://netllama.linux-sxs.org
More information about the fedora-list
mailing list