(no subject) DHCP configuration
Tim
ignored_mailbox at yahoo.com.au
Sat Dec 16 04:41:19 UTC 2006
On Fri, 2006-12-15 at 07:12 -0800, Sergio Silva wrote:
> Tenho um servidor fazendo as funções de roteador e DHCP
> ( 192.168.20.252 e 192.168.200.1). Gostaria que somente a rede
> 192.168.200.0 fosse atendida pelo DHCP.
> Já coloquei a opção INTERFACES="eth1" no arquivo /etc/sysconfig/dhcp e
> nãso funcionou.
man dhcpd.conf
search in it for "address" and "listen"
configure listen parameters in /etc/dhcpd.conf
Put your listening address for the server after the local-address
option.
e.g. local-address 192.168.200.255
> No subnet declaration for eth0 (192.168.20.252).
> ** Ignoring requests on eth0. If this is not what
> you want, please write a subnet declaration
> in your dhcpd.conf file for the network segment
> to which interface eth0 is attached. **
e.g. subnet 192.168.200.0 netmask 255.255.255.0
> Can't bind to dhcp address: Address already in use
> Please make sure there is no other dhcp server
> running and that there's no entry for dhcp or
> bootp in /etc/inetd.conf. Also make sure you
> are not running HP JetAdmin software, which
> includes a bootp server.
You might have another DHCP server on your LAN. You have to configure
each to work separately.
You might have another DHCP-like server on the same computer, you'd have
to stop one, or configure them to listen on different interfaces.
Post your /etc/dhcpd.conf file if you need more help.
Here's an example, with *SOME* of your addresses inserted into it, it
might not work for you without some changes:
--------------------------- begin ---------------------------------
authoritative;
allow client-updates;
include "/etc/rndc.key";
default-lease-time 21600; # 2 hours
max-lease-time 43200; # 24 hours
min-lease-time 30; # 30 seconds
server-name "boss";
local-address 192.168.200.255
## DHCP + dynamic DNS server options (next 4 lines)
#ddns-domainname "lan.example.com.";
#ddns-rev-domainname "in-addr.arpa.";
#ddns-update-style interim;
#ddns-updates on;
option domain-name "lan.example.com.";
option ntp-servers lan.example.com;
option ip-forwarding off;
shared-network lan.example.com {
subnet 192.168.200.1 netmask 255.255.255.0 {
range 192.168.2.2 192.168.200.253;
option routers 192.168.200.1;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.200.255;
option domain-name-servers 192.168.200.1;
## For DHCP + dynamic DNS (next two zone statements)
# zone lan.example.com. {
# primary 192.168.200.1;
# key rndckey;
# }
#
# zone 1.168.192.in-addr.arpa. {
# primary 192.168.200.1;
# key rndckey;
# }
}
}
-------------------------- end -------------------------------
You can delete the # DHCP + dynamic DNS sections if you don't have DHCP
and DNS servers talking to each other. If you do, then write something
like them, without hashes commenting them out.
More information about the fedora-list
mailing list