(no subject)

[Christofer C. Bell]

On 1/25/06, Steven Ringwald <asric at asric.com> wrote:
>
> Sorry. It has been a long day. The command is actually 'ethtool', and is
> located in the /sbin directory.
>
> /sbin/ethtool eth0

Steve, you're actually correct.  There is an mii-tool command (and an
mii-diag), you just forgot the dash. ;-)

[root at circe ~]# mii-tool eth0
eth0: negotiated 100baseTx-FD flow-control, link ok
[root at circe ~]# mii-diag eth0
Basic registers of MII PHY #1:  3000 782d 02a8 0154 05e1 45e1 0001 0000.
 The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
 Basic mode control register 0x3000: Auto-negotiation enabled.
 You have link beat, and everything is working OK.
 Your link partner advertised 45e1: Flow-control 100baseTx-FD
100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control.
   End of basic transceiver information.

[root at circe ~]#


--
Chris

"I trust the Democrats to take away my money, which I can afford.  I
trust the Republicans to take away my freedom, which I cannot."