Bond doesn't work after reboot network

[Gonzalo]

Yes, It was a typo and copy paste. I mean

/etc/sysconfig/network-scripts/ifcfg-bond0
/etc/sysconfig/network-scripts/ifcfg-eth1
/etc/sysconfig/network-scripts/ifcfg-eth2


----- Original Message ----- 
From: "Bohmer, Andre ten" <Andre.tenBohmer at wur.nl>
To: "For users of Fedora Core releases" <fedora-list at redhat.com>
Sent: Thursday, January 26, 2006 11:33 AM
Subject: RE: Bond doesn't work after reboot network


> Hi,
>
> >
> >         Following instructions on
> > /usr/src/linux-2.4/Documentation/networking/bonding.txt I
> > have bonding working, but after a network restart (service
> > network restart) my two bonding nics doesn't get up. I have
> > to start them manually (ifconfig eth1 up, ifconfig eth2 up).
> > Any ideas?, thanks.
> >
> > This is my system:
> >
> > Fedora core 2
> > Linux version 2.4.22-1.2115.nptl
> > (bhcompile at daffy.perf.redhat.com) (gcc version 3.2.3 20030422
> > (Red Hat Linux 3.2.3-6)) #1 Wed Oct 29 15:42:51 EST 2003
> >
> > and this is my configuration:
> >
> > /etc/modules.conf
> > alias bond0 bonding
> > alias eth0 3c59x
> > alias eth1 3c59x
> > alias eth2 3c59x
> > options bonding mode=0 miimon=100
> >
> > /etc/sysconfig/networ-scripts/ifcfg-bond0
> Typo (missing k)? Should be /etc/sysconfig/network-scripts/ifcfg-bond0
>
> Cheers,
> André
>
> > DEVICE=bond0
> > IPADDR=10.200.58.150
> > NETMASK=255.255.255.0
> > NETWORK=10.200.58.0
> > BROADCAST=10.200.58.255
> > ONBOOT=yes
> > BOOTPROTO=none
> > USERCTL=no
> >
> > /etc/sysconfig/networ-scripts/ifcfg-eth1
> > DEVICE=eth1
> > ONBOOT=yes
> > BOOTPROTO=none
> > MASTER=bond0
> > SLAVE=yes
> > USERCTL=no
> >
> > /etc/sysconfig/networ-scripts/ifcfg-eth2
> > DEVICE=eth2
> > ONBOOT=yes
> > BOOTPROTO=none
> > MASTER=bond0
> > SLAVE=yes
> > USERCTL=no
> >
>
> -- 
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
> --------------------------------------------------------------------------
-------------------------
> Texto añadido por Panda Client Shield:
>
>  Este mensaje NO ha sido clasificado como SPAM. Si se trata de un mensaje
de correo no solicitado (SPAM), haz clic en el siguiente vínculo para
reclasificarlo: http://127.0.0.1:6083/Panda?ID=pav_27924&SPAM=true
> --------------------------------------------------------------------------
-------------------------
>