Failures with cdrecord
Janina Sajka
janina at rednote.net
Fri Jul 14 21:06:14 UTC 2006
This is old news now, sorry. I've been away running an exhibit booth for
a few weeks at a convention.
I did want to tell you that I got this problem resolved. It turned out
to be the media, after all. So, I guess not all media on the store shelf
is acceptable.
Janina
Jim Cornette writes:
> Janina Sajka wrote:
> >Hi, Jim:
> >
> >Jim Cornette writes:
> >>Janina Sajka wrote:
> >>>All of a sudden I'm finding myself unable to burn a cd rom with
> >>>cdrecord. I'm having the same problem on three different systems, each
> >>>of which is running fully updated FC5. The cdrecord on each of these
> >>>machines is cdrecord-2.01.01.0.a03-3, unchanged since March last. I'm
> >>>also quite certain that I had no problems burning back around the
> >>>beginning of May. I've tried a few different discs, and scsi, ide, usb
> >>>and firewire burners--all with the similar failures like the following:
> >>>
> >>>cmd finished after 0.001s timeout 200s
> >>>write track pad data: error after 0 bytes
> >>>BFree: 0 K BSize: 1506 K
> >>>Starting new track at sector: 0
> >>>Track 12: 0 of 6 MB written.cdrecord: Input/output error.
> >>>write_g1: scsi sendcmd: no error
> >>>CDB: 2A 00 00 00 00 00 00 00 1F 00
> >>>status: 0x2 (CHECK CONDITION)
> >>>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00
> >>>Sense Key: 0x5 Illegal Request, Segment 0
> >>>Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
> >>>Sense flags: Blk 0 (not valid)
> >>>resid: 63488
> >>>cmd finished after 0.001s timeout 200s
> >>>
> >>>write track data: error after 0 bytes
> >>>cdrecord: A write error occured. (Seamonkey mail says occurred, could
> >>>the error message state something more than "it does not work")
> >>>cdrecord: Please properly read the error message above. (I did, but it
> >>>was not that helpful.)
> >>>Writing time: 11.980s
> >>>Average write speed 9.1x.
> >>>Fixating...
> >>>Fixating time: 0.003s
> >>>cdrecord: fifo had 64 puts and 1 gets.
> >>>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> >>>
> >>>Is it me? My media? Or something in some library? I've downversioned two
> >>>kernels, but still get the same failure.
>
> I did a search on the "Sense Key: 0x5 Illegal Request, Segment 0"
>
> Which mentioned DAO vs. TAO mode. Maybe you could search with criteria
>
> Excerpt below:
> and mentioned that it works okay in DAO mode but not TAO. This is
> expected to be a transient problem as the driver catches up with the drive.
>
> http://www.linuxtopia.org/online_books/linux_beginner_books/debian_linux_desktop_survival_guide/LG_CED_8080B.shtml
>
>
> >Is it possible this could be my cdr media? Why would it be trying to
> >write track 12 when I specified a .iso file (specifically boot.iso from
> >the FC5 installation media)?
>
> This might be the problem. I never tried to grab an iso file off of the
> CDROM itself. Are you copying the ISO file to the hard drive? It is a
> relatively small file.
>
> My reasoning is that the disk with the iso file is too slow in access
> time for the writer to keep up with the reader.
> Another influencing factor might be that both the CD Recorder and the CD
> reader are on the same controller.
> Since you mentioned using USB,IDE and other readers.
>
> >
> >>I thought that there was another possible problem with cdrecord. I could
> >>not find the thread.
> >>
> >Thanks for looking. I also didn't find anything when I Googled. So, I'm
> >wondering whether it's me or something bigger. Is it possible no one
> >else is using cdrecord from the cli that there haven't been complaints?
>
> I believe there are a lot of die hard CLI users on the list. I use GUI
> to record and let the front-end programs do the work.
>
> I think the lack of response might be regarding that no is sure what
> options you are giving to burn the ISO. As noted above, the message
> referring to the error is pretty useless. Please properly read the
> message above. I did, it only indicated what I knew and all "properly
> reading the message" gained was a spelling error.
>
> >Seems like it might be me, but media is aall I haven't ruled out.
>
> I suppose that you could try burning with the same media on another
> machine or using another OS to test.
>
> Are you compiling a kernel with special features enabled or using a
> stock kernel?
>
> Anyway, there needs to be an easier interface for bugzilla which does
> not look so horrible with text based browsers.
>
> Jim
>
> >
> >Janina
>
>
>
> >>Jim
> >>
>
>
> --
> You can't hug a child with nuclear arms.
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
--
Janina Sajka Phone: +1.240.715.1272
Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://ScreenlessPhone.Com to learn more.
Chair, Accessibility Workgroup Free Standards Group (FSG)
janina at freestandards.org http://a11y.org
More information about the fedora-list
mailing list