tg3 networking issue
Julian C. Dunn
jdunn at devlin.ca
Wed Jul 19 21:45:42 UTC 2006
On Mon, 2006-07-17 at 17:35 +0200, Patrick wrote:
> I recently updated to kernel 2.6.17-1.2157_FC5 on my FC5 laptop. Not
> sure if it's related but now networking stops working intermittently.
> The driver used is tg3 for a Broadcom BCM5789 nic. In /var/log/messages
> I see:
>
> NETDEV WATCHDOG: eth0: transmit timed out
> tg3: eth0: transmit timed out, resetting
> tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2
> tg3: eth0: Link is down.
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
I have never had much luck with the Broadcom chipset and the tg3 driver.
Back when I was working at CBC.ca we had many problems on our
HP-DL380G4's, to the extent that I wrote a report about it, which I
summarized on my blog:
http://www.aquezada.com/staff/julian/journal/?p=56
Eventually we ended up buying dual port Intel EtherExpress NICs to
workaround the problem.
- Julian
--
Julian C. Dunn, P.Eng.
Systems Administrator
e: julian.dunn at devlin.ca
p: 416-363-6316 x292
f: 416-363-6102
w: www.devlin.ca
Devlin eBusiness Architects Inc.
185 Frederick Street
Toronto, ON M5A 4L4
More information about the fedora-list
mailing list