FC5 install disk and more recent kernels will not boot
Jim Shepherd
jeshep at gmail.com
Wed Jun 28 06:17:33 UTC 2006
I just updated to the "kernel-2.6.17-1.2139_FC5" kernel and am getting
the following error:
APIC error on CPU0: 02(02)
This error repeats continually very early in the boot process. The
system must be reset to gain control. From a google search, it seems
that this error indicates a system error with the APIC communications.
I have updated the BIOS to the latest version, disabled apic in the
BIOS, and tried using the "noapic", "acpi=off", and "pci=noacpi"
kernel options without any effect. As before, I can still boot
successfully with any FC4 kernel. Why am I still getting these errors
when it has been disabled in the BIOS and kernel, and only with the
FC5 kernels? Any ideas?
-Jim
On 6/25/06, Jim Shepherd <jeshep at gmail.com> wrote:
> Does anyone have any ideas on how I can debug this problem I am having
> with the FC5 kernels locking up very early in the boot process? Are
> there debug switches I can enable to get more information and try to
> zero in on the exact problem area? Should I try the main kernel list?
> Thanks for any suggestions.
>
> -Jim Shepherd
>
> On 6/21/06, Jim Shepherd <jeshep at gmail.com> wrote:
> > I have not been able to get any of the kernels packaged with FC5 to
> > boot on my system. Initially, I tried booting from a burned DVD copy
> > of FC5. After pressing "Enter" at the initial install screen, the
> > kernel tries to load, but hangs after printing "Checking 'hlt'
> > instruction ...OK". The system must then be hard reset. The system
> > previously had a FC4 working fine and possibly FC3 before that (I
> > can't remember how many further versions back have run on this
> > particular hardware setup). From the working FC4 install, it seems
> > that ACPI related messages appear after the "Checking 'hlt'
> > instruction" line, so I tried disabling acpi using some of the kernel
> > parameters. Adding "noacpi" and/or "acpi=off" had no effect. Adding
> > "pci=noacpi" results in one more line being printed: "ACPI: setting
> > ELCR to 1a20 (from 1820)" before hanging. I then performed a yum
> > upgrade of the system from FC4 to FC5, hoping that a newer kernel
> > release would solve the problem. Unfortunately, the newer kernels
> > fared no better (kernel-2.6.16-1.2133_FC5 is the most recent version I
> > have tried). Luckily, the older FC4 kernel (kernel-2.6.15-1.1833_FC4)
> > still works fine with all of the other packages from FC5, so my
> > computer is still usable. The computer itself consists of an ASUS
> > A7N8X Deluxe mother board (I believe it has the Nvidia nforce2 chipset
> > and an Athlon 2400+ XP processor), 1.5GB generic RAM, IDE drive, and
> > Matrox G450 video board. Any help is greatly appreciated. Please let
> > me know if I can provide any further information to help debug this
> > problem.
> >
> > -Jim Shepherd
> >
>
More information about the fedora-list
mailing list