Printer Share in FC5

Thu Jun 1 07:16:42 UTC 2006

2006/5/31, Antonio Montagnani <antonio.montagnani at gmail.com>:
> 2006/5/31, Thomas Taylor <linxt at comcast.net>:
> > On Wednesday 31 May 2006 05:05, Antonio Montagnani wrote:
> > > I have a new FC5 system with two printer (parallel Epson C70 and USB
> > > Samsung Ml-1610) that work great.
> > > Now I want to share both of them with another FC5 laptop.
> > > I followed the procedure but I can't get the test page from remote
> > > machine (that is used also on another network and can share printers).
> > >
> > > I used the printer configuartion tool, I told to share printers to All
> > > using CUPS (IPP).
> > > Where shall I start investigation???
> > >
> > > Any help will be appreciated.....please note that it is not depending
> > > on iptables as I didn't succeed even when iptables was stopped.
> > > And what about hosts.allow and host.deny???
> > >
> > > --
> > > Antonio Montagnani
> > > Skype : antoniomontag
> >
> > How about some more information.  Such as pertinent portions of cups.conf,
> > what error messages you're receiving, how the network is set up, etc..
> >
> > Tom
> >
> > --
> > Tom Taylor
> > Linux user #263467
> > Federal Way, WA
> >
> >
> >
> >
> >
> >
> >
> > --
> > fedora-list mailing list
> > fedora-list at redhat.com
> > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> >
>
> 192.168.0.1 is the machine where both printers are connected to
> 192.168.0.5 is the other computer: they are
>
> My cupsd.conf is:
> LogFilePerm 0600
> MaxLogSize 2000000000
> # Show general information in error_log.
> LogLevel info
> Printcap /etc/printcap
> <Location />
>   # Allow shared printing and remote administration...
>   Order allow,deny
>   Allow @LOCAL
> </Location>
> <Location /admin>
>   AuthType Basic
>   AuthClass System
>   # Allow remote administration...
>   Order allow,deny
>   Allow @LOCAL
> </Location>
> <Location /printers/Samsung>
>   Order Deny,Allow
>   Deny From All
>   Allow From 127.0.0.1
>   AuthType None
> </Location>
> <Location /printers/Laser>
>   Order Deny,Allow
>   Deny From All
>   Allow From 127.0.0.1
>   AuthType None
> </Location>
> <Location /printers/printer>
>   Order Deny,Allow
>   Deny From All
>   Allow From 127.0.0.1
>   AuthType None
>   Allow from All
> </Location>
> # Enable printer sharing and shared printers.
> # Allow remote access
> <Location /admin/conf>
>   AuthType Basic
>   Require user @SYSTEM
>   # Allow remote access to the configuration files...
>   Order allow,deny
>   Allow @LOCAL
> </Location>
> <Policy default>
>   <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job
> Purge-Jobs Set-Job-Attributes Create-Job-Subscription
> Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job
> Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
>     Require user @OWNER @SYSTEM
>     Order deny,allow
>   </Limit>
>   <Limit Pause-Printer Resume-Printer Set-Printer-Attributes
> Enable-Printer Disable-Printer Pause-Printer-After-Current-Job
> Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer
> Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer
> Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer
> CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs
> CUPS-Set-Default CUPS-Add-Device CUPS-Delete-Device>
>     AuthType Basic
>     Require user @SYSTEM
>     Order deny,allow
>   </Limit>
>   <Limit All>
>     Order deny,allow
>   </Limit>
> </Policy>
> <Location /printers/Samsung_1610>
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> AuthType None
> Allow from All
> </Location>
>
> # Lines below are automatically generated - DO NOT EDIT
> <Location /printers/ml-1610--1>
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> AuthType None
> Allow from All
> </Location>
> <Location /printers/EpsonC70>
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> AuthType None
> Allow from All
> </Location>
> Browsing On
> BrowseProtocols cups
> BrowseOrder Deny,Allow
> BrowseAllow from @LOCAL
> BrowseAddress 255.255.255.255
> Listen *:631
>
> My printcap file is:
> # This file was automatically generated by cupsd(8) from the
> # /etc/cups/printers.conf file.  All changes to this file
> # will be lost.
> ml-1610--1|ml-1610--1:rm=Casa:rp=ml-1610--1:
> EpsonC70|Epson Inkjet C-70:rm=Casa:rp=EpsonC70:
>
> any furtehr information???
> --
> Antonio Montagnani
> Skype : antoniomontag
>

My printers.conf file on the satellite machine is:
# Printer configuration file for CUPS v1.2.1
# Written by cupsd on 2006-05-31 17:58
<Printer Epson915>
Info Epson915
DeviceURI lpd://192.168.0.1/Epson915
State Idle
StateTime 1149091111
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer EpsonC70>
Info EpsonC70
DeviceURI ipp://192.168.0.1/printers/Epson
State Stopped
StateMessage /usr/lib/cups/backend/ipp failed
StateTime 1149091116
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer EpsonC915>
Info prova
Location prova
DeviceURI ipp://192.168.0.1/printers/Epson915
State Idle
StateTime 1149091095
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<DefaultPrinter HPlaser>
Info HPlaser
DeviceURI smb://guest@192.168.0.2/HPlaserj
State Idle
StateTime 1149091095
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer Samsung>
Info Samsung
DeviceURI ipp://192.168.0.1/printers/Samsung
State Stopped
StateMessage /usr/lib/cups/backend/ipp failed
StateTime 1149091112
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>

Any Cups guru around???
-- 
Antonio Montagnani
Skype : antoniomontag