FC5 Struggling with printers shares

Sun Jun 4 21:15:42 UTC 2006

I've experienced this.  On the machine that has the shared printers,
what have you done to open up the firewall and liberate permissions in
/etc/hosts.deny and /etc/hosts.allow?  If you dont have an opening,
that print job from the other system can't get in.

On 6/3/06, Antonio Montagnani <antonio.montagnani at gmail.com> wrote:
> 2006/6/3, Antonio Montagnani <antonio.montagnani at gmail.com>:
> > 2006/6/2, Antonio Montagnani <antonio.montagnani at gmail.com>:
> > > 2006/6/2, Thomas Taylor <linxt at comcast.net>:
> > > > On Thursday 01 June 2006 15:16, Antonio Montagnani wrote:
> > > > > I told to my laptop to use shared printers (via Cup/IPP) connected to
> > > > > my desktop.
> > > > > When I send a test page from printer configuration tool nothing is
> > > > > printed and i get the following message.:
> > > > >
> > > > > 02/Jun/2006:00:05:16 +0200] Adding start banner page "none" to job 598.
> > > > > I [02/Jun/2006:00:05:16 +0200] Adding end banner page "none" to job 598.
> > > > > I [02/Jun/2006:00:05:16 +0200] Job 598 queued on "EpsonC70" by "root".
> > > > > W [02/Jun/2006:00:05:35 +0200] [Job 130] Network host '192.168.0.1' is
> > > > > busy, down, or unreachable; will retry in 30 seconds...
> > > > >
> > > > > I am lost as I have a twin similar system in the office where my
> > > > > laptop (192.168.0.5) can print to my desktop (192.168.0.1)  (and both
> > > > > have iptables with exactly same rules ....no rule for CUP), and I
> > > > > can't get out of the problem.
> > > > >
> > > > > >From this point, what shall I look into??
> > > > >
> > > > > CUPS is always a pain for newbies...
> > > > > --
> > > > > Antonio Montagnani
> > > > > Skype : antoniomontag
> > > >
> > > > CUPS has set up a que for your Epson C70 printer but it's not being addressed
> > > > properly.
> > > >
> > > > Is this a network at your home or at your work?
> > > > If it's at home, are you trying to print to the printer at home or at work?
> > > > Please show contents of etc/cups/printers.conf, etc/hosts, etc/hosts/allow and
> > > >     etc/hosts/deny
> > > >
> > > > Tom
> > > >
> > > > --
> > > > Tom Taylor
> > > > Linux user #263467
> > > > Federal Way, WA
> > > >
> > > >
> > > >
> > > Tnx TOM
> > >
> > >
> >
> > I switched on the client machine, and immediately checked var/log/cups/error_log
> > Please check it:
> > what does message at 7:07:23 about setting ACL means??
> > Any other comment welcome.
> >
> >
> > [03/Jun/2006:07:07:22 +0200] "AuthClass System" is deprecated;
> > consider using "Require @SYSTEM" on line 838.
> > I [03/Jun/2006:07:07:22 +0200] Listening to 127.0.0.1:631 (IPv4)
> > I [03/Jun/2006:07:07:22 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
> > I [03/Jun/2006:07:07:22 +0200] Cleaning out old temporary files in
> > "/var/spool/cups/tmp"...
> > I [03/Jun/2006:07:07:22 +0200] Configured for up to 100 clients.
> > I [03/Jun/2006:07:07:22 +0200] Allowing up to 100 client connections per host.
> > I [03/Jun/2006:07:07:22 +0200] Creating CUPS default administrative policy:
> > I [03/Jun/2006:07:07:22 +0200] <Policy default>
> > I [03/Jun/2006:07:07:22 +0200] <Limit Send-Document Send-URI
> > Cancel-Job Hold-Job Release-Job Restart-Job Purge-Jobs
> > Set-Job-Attributes Create-Job-Subscription Renew-Subscription
> > Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job
> > Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Authenticate-Job>
> > I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow
> > I [03/Jun/2006:07:07:22 +0200] Require user @OWNER @SYSTEM
> > I [03/Jun/2006:07:07:22 +0200] </Limit>
> > I [03/Jun/2006:07:07:22 +0200] <Limit Pause-Printer Resume-Printer
> > Set-Printer-Attributes Enable-Printer Disable-Printer
> > Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
> > Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
> > Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer
> > CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs
> > CUPS-Reject-Jobs CUPS-Set-Default>
> > I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow
> > I [03/Jun/2006:07:07:22 +0200] AuthType Basic
> > I [03/Jun/2006:07:07:22 +0200] Require user @SYSTEM
> > I [03/Jun/2006:07:07:22 +0200] </Limit>
> > I [03/Jun/2006:07:07:22 +0200] <Limit All>
> > I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow
> > I [03/Jun/2006:07:07:22 +0200] </Limit>
> > I [03/Jun/2006:07:07:22 +0200] </Policy>
> > I [03/Jun/2006:07:07:22 +0200] Full reload is required.
> > I [03/Jun/2006:07:07:22 +0200] Loaded MIME database from '/etc/cups':
> > 33 types, 38 filters...
> > I [03/Jun/2006:07:07:23 +0200] Loading job cache file
> > "/var/cache/cups/job.cache"...
> > I [03/Jun/2006:07:07:23 +0200] Full reload complete.
> > I [03/Jun/2006:07:07:23 +0200] Listening to 127.0.0.1:631 on fd 0...
> > E [03/Jun/2006:07:07:23 +0200] Unable to set ACLs on root certificate
> > "/var/run/cups/certs/0" - Operation not supported
> > I [03/Jun/2006:07:07:23 +0200] Started filter
> > /usr/lib/cups/filter/pstops (PID 1888) for job 130.
> > I [03/Jun/2006:07:07:23 +0200] Started filter
> > /usr/lib/cups/filter/pstoraster (PID 1889) for job 130.
> > I [03/Jun/2006:07:07:23 +0200] Started filter
> > /usr/lib/cups/filter/rastertoepson (PID 1891) for job 130.
> > I [03/Jun/2006:07:07:23 +0200] Started backend
> > /usr/lib/cups/backend/lpd (PID 1892) for job 130.
> > E [03/Jun/2006:07:07:23 +0200] PID 1888 (/usr/lib/cups/filter/pstops)
> > stopped with status 1!
> > I [03/Jun/2006:07:07:23 +0200] Hint: Try setting the LogLevel to
> > "debug" to find out more.
> > E [03/Jun/2006:07:07:23 +0200] [Job 130] Unable to open print file
> > "/var/spool/cups/d00130-001" - Permission denied
> > E [03/Jun/2006:07:07:26 +0200] [Job 130] No pages found!
> > E [03/Jun/2006:07:07:26 +0200] PID 1891
> > (/usr/lib/cups/filter/rastertoepson) stopped with status 1!
> > I [03/Jun/2006:07:07:26 +0200] Hint: Try setting the LogLevel to
> > "debug" to find out more.
> > W [03/Jun/2006:07:07:26 +0200] [Job 130] Network host '192.168.0.1' is
> > busy, down, or unreachable; will retry in 30 seconds...
> > W [03/Jun/2006:07:07:55 +0200] [Job 130] Network host '192.168.0.1' is
> > busy, down, or unreachable; will retry in 30 seconds...
> > W [03/Jun/2006:07:08:25 +0200] [Job 130] Network host '192.168.0.1' is
> > busy, down, or unreachable; will retry in 30 seconds...
> > W [03/Jun/2006:07:08:55 +0200] [Job 130] Network host '192.168.0.1' is
> > busy, down, or unreachable; will retry in 30 seconds...
> > W [03/Jun/2006:07:09:25 +0200] [Job 130] Network host '192.168.0.1' is
> > busy, down, or unreachable; will retry in 30 seconds...
> > W [03/Jun/2006:07:09:55 +0200] [Job 130] Network host '192.168.0.1' is
> > busy, down, or unreachable; will retry in 30 seconds...
> >
> > --
> > Antonio Montagnani
> > Skype : antoniomontag
> >
>
>  a good clue is that I cannot see the shared printers in the printers
> configuration tool on the satellite machine...any idea, I am googling
> but I hope that an answer comes from this list!!!
>
> --
> Antonio Montagnani
> Skype : antoniomontag
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>

-- 
Paul E. Johnson
Professor, Political Science
1541 Lilac Lane, Room 504
University of Kansas