IRQ 17 Disable message

[Terry Snyder]

On 6/9/06, James Wilkinson <fedora at westexe.demon.co.uk> wrote:
>
> Terry Snyder wrote:
> > I am loosing my wireless network connection, and I get these messages in
> the
> > system log when it happens.  I have upgraded to a new computer with more
> > features but for the most part the network card is the same as my old
> > computer.  What would be a way to stop this from happening?
> <snip>
> > Jun  7 07:00:45 8lfb2b1 kernel: [<f99a06ca>] (ndis_isr+0x0/0xa1
> > [ndiswrapper])
>
> Looks like you're having trouble with the Windows driver and
> ndiswrapper.
>
> Which wireless card is it? Which chipset? (What does lspci say?)
>
> There might be a native Linux driver available.
>
> James.
>
> --
> E-mail address: james | 'In a serial interface, the data bits move down a
> @westexe.demon.co.uk  | single channel one after the other, like railway
>                       | trains. This is different from the parallel
> interface
>                       | in which groups of bits arrive together, like
> London
>                       | buses.'  -- 'The Computer Dictionary', Jon Wedge
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>

00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev
03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial
ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
01)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 01d8
(rev a1)
03:01.0 CardBus bridge: O2 Micro, Inc. Unknown device 7135 (rev 21)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Unknown device 00f7 (rev 02)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit
Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Corporation Unknown device 4311 (rev
01)

I extracted the bcm43xx firmware but can't seem to get the system to see the
card with out ndiswrapper.  I did try to start working with the firmware
after I started getting this message.

I have a Dell TrueMobile 1390 802.11g

-- 
Terry Snyder Jr
Computer Support Specialist
http://www.personal.psu.edu/tes215
Linux (Red Hat, Fedora Core), Windows, Mac
Fedora Core 5  3 users,  load average: 0.19, 0.30, 0.28
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20060609/caa1226a/attachment-0001.htm>