broblem whit nic card

[l.schneide]

l.schneide wrote:

> Hi Mikkel
>
> i don't understand your replie
>
> Lionel
>
> Mikkel L. Ellertson wrote:
>
>>l.schneide wrote:
>>
>>>Hi all
>>>Thanks for you replie
>>>but impossible ta make it to start. I got a dualboot with NT and its
>>>work fine.
>>>If i type cat /proc/interrupts  i don t see it and the irq 11 is not use
>>>Anyboddy got an idea ?
>>>Where do i write manualy (what file) the config of the etherlink III ,
>>>only in modprobe.conf . A what do i write exatly ?
>>>
>>>thanks
>>>lionel
>>>
>>>l.schneide wrote:
>>>
>>>>Hi all
>>>>
>>>>I got a probleme to configure my nic card on fedora core 4. I use the
>>>>network configuration under Gnomeand i can't cofing. the NIC
>>>>I got a 3com Etherlink III on IRQ 11 and I/O 0x300. I tied a lot of
>>>>think but i can make it to start.
>>>>first In what field do i put the I/O adress ?
>>>>and second in what file the config is write to see if it's right ?
>>>>thanks
>>>>lionel
>>>>
>>>>
>>If you promise to stop top posting, I will tell you how to fix it.
>>(You need to use the option statement in modprobe.conf.)
>>
>>Mikkel
>>
>
hi all

I make all that i can do to start my nic card and it impossible
If i do cat /proc/irq  i dont see the irq 11 used

In /etc/modprobe.conf i got

alias eth0 3c509
option 3C509 io=0x300 irq=11

The card is not in Pn'P mode. I configure it manualy with the good values. and it work fine with NT and W98 as this
thanks for your replie
lionel


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20060304/755c23d8/attachment-0001.htm>