[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: no sensors detected in gkrellm



On Sunday 05 March 2006 14:57, Gene Heskett wrote:
> On Sunday 05 March 2006 09:02, hicham wrote:
> >On 3/5/06, Alessandro Brezzi <alessandro brezzi gmail com> wrote:
> >> 2006/3/5, hicham <hichamlinux gmail com>:
> >>  do you reboot after sensors-detect?
> >
> >yes I did
> >here is the  sensors-detect summary output :
> >######################################################################
> >### Now follows a summary of the probes I have just done.
> > Just press ENTER to continue:
> >
> >Driver `to-be-written' (should be inserted):
> >  Detects correctly:
> >  * ISA bus address 0x0290 (Busdriver `i2c-isa')
> >    Chip `Winbond W83627EHF Super IO Sensors' (confidence: 9)
> >
> >
> > I will now generate the commands needed to load the I2C modules.
> > Sometimes, a chip is available both through the ISA bus and an I2C
> > bus. ISA bus access is faster, but you need to load an additional
> > driver module for it. If you have the choice, do you want to use the
> > ISA bus or the I2C/SMBus (ISA/smbus)? ISA
> >
> >To make the sensors modules behave correctly, add these lines to
> >/etc/modprobe.conf:
> >
> >#----cut here----
> ># I2C module options
> >alias char-major-89 i2c-dev
> >#----cut here----
> >--------------------------------------------------> " Those I've added
> >in  /etc/modprobe.conf "
> >
> >To load everything that is needed, add this to some /etc/rc* file:
> >
> >#----cut here----
> ># I2C adapter drivers
> >modprobe i2c-isa
> ># I2C chip drivers
> ># no driver for Winbond W83627EHF Super IO Sensors yet
> ># sleep 2 # optional
> >/usr/bin/sensors -s # recommended
> >#----cut here----
> >--------------> " I don't know where to put those above lines which
> >/etc/rc*  ?"
>
> Near the bottom of /etc/rc.d/rc.local
>
Sensors-detect found a similar set for me:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-viapro
modprobe i2c-isa
# I2C chip drivers
modprobe eeprom
modprobe w83627hf
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

The output of 'sensors' is nonsensical:

w83627hf-isa-0290
Adapter: ISA adapter
VCore 1:   +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
VCore 2:   +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
+3.3V:     +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
+5V:       +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
+12V:      +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
-12V:      +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
-5V:       +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
V5SB:      +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
VBat:      +4.08 V  (min =  +4.08 V, max =  +4.08 V)       ALARM  (beep)
fan1:        0 RPM  (min =    0 RPM, div = 128)              ALARM  (beep)
fan2:        0 RPM  (min =    0 RPM, div = 128)              ALARM  (beep)
fan3:        0 RPM  (min =    0 RPM, div = 128)              ALARM  (beep)
temp1:        -1°C  (high =    -1°C, hyst =    -1°C)   sensor = thermistor   
ALARM   (beep)
temp2:      +0.0°C  (high =    +0°C, hyst =    +0°C)   sensor = thermistor   
ALARM   (beep)
temp3:      +0.0°C  (high =    +0°C, hyst =    +0°C)   sensor = thermistor   
ALARM   (beep)
vid:      +0.000 V  (VRM Version 2.4)
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm enabled
....  #some sensors on a card, that I told it to ignore
eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 5000
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 5000
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

Maybe a problem related to hicham's?

Anne

Attachment: pgpVrBsVxZ7Tq.pgp
Description: PGP signature


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]