[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: On-board ethernet - VT6102 Rhine-II - and slow connection



On Monday 06 March 2006 00:23, Jeff Vian wrote:
>
> Thanks for pointing out ethtool.  I had earlier seen mii-tool but could
> not remember what it was.
>
> The -s you show above allows setting the parameters but does not display
> anything about current settings..
>
> After some playing with ethtool I found out that the display from
> "ethtool ethX" is likely what Anne needs.  Example from mine below.
>
> [root eagle ~]# ethtool eth0
> Settings for eth0:
>         Supported ports: [ MII ]
>         Supported link modes:   10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>         Supports auto-negotiation: Yes
>         Advertised link modes:  10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>         Advertised auto-negotiation: Yes
>         Speed: 100Mb/s
>         Duplex: Half
>         Port: MII
>         PHYAD: 1
>         Transceiver: external
>         Auto-negotiation: on
>         Supports Wake-on: g
>         Wake-on: d
>         Link detected: yes
>
Thanks for following this up.  I'm mid-rebuild atm, but hopefully I'll get to 
this later today.

Anne

Attachment: pgp3WwvwgTlo4.pgp
Description: PGP signature


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]