bittorrent freezes the system

[Josenildo Marques]

On Monday 08 May 2006 20:02, Lonni J Friedman escreveu o seguinte:
> On 5/8/06, Josenildo Marques <josenildo.marques at gmail.com> wrote:
> > On Monday 08 May 2006 19:44, Lonni J Friedman escreveu o seguinte:
> > > On 5/8/06, Josenildo Marques <josenildo.marques at gmail.com> wrote:
> > > > On Monday 08 May 2006 19:30, Lonni J Friedman escreveu o seguinte:
> > > > > Try running:
> > > > > ethtool -s eth0 duplex full
> > > >
> > > > The command was accepted.
> > >
> > > ok, so what does "ethtool eth0" show?
> >
> > # ethtool eth0
> > Settings for eth0:
> >         Supported ports: [ TP MII ]
> >         Supported link modes:   10baseT/Half 10baseT/Full
> >                                 100baseT/Half 100baseT/Full
> >         Supports auto-negotiation: Yes
> >         Advertised link modes:  10baseT/Half 10baseT/Full
> >                                 100baseT/Half 100baseT/Full
> >         Advertised auto-negotiation: No
> >         Speed: 100Mb/s
> >         Duplex: Full
> >         Port: MII
> >         PHYAD: 32
> >         Transceiver: internal
> >         Auto-negotiation: off
> >         Supports Wake-on: pumbg
> >         Wake-on: d
> >         Current message level: 0x00000007 (7)
> >         Link detected: yes
>
> ok, you're at 100M/full now, which might be better.  Does the problem
> still reproduce?

Since you helped me it happened twice. I'm using BT right now and the log 
messages are showing
May 10 14:58:18 localhost kernel: eth0: PCI Bus error 2200.
May 10 14:58:18 localhost kernel: eth0: PCI Bus error 0200.
May 10 15:00:14 localhost kernel: eth0: PCI Bus error 2200.
May 10 15:00:14 localhost kernel: eth0: PCI Bus error 0200.
May 10 15:01:51 localhost kernel: eth0: PCI Bus error 2200.
May 10 15:01:51 localhost kernel: eth0: PCI Bus error 0200.
May 10 15:03:18 localhost kernel: eth0: PCI Bus error 2200.
May 10 15:03:18 localhost kernel: eth0: PCI Bus error 0200.
May 10 15:03:38 localhost kernel: eth0: PCI Bus error 2200.
May 10 15:03:38 localhost kernel: eth0: PCI Bus error 0200.

I think it must be a hardware problem... I'll try and change the network card 
in order to see if the same thing happens.


-- 
Josenildo Marques
usuário Linux registrado No. 341648
blog http://monomito.wordpress.com/
*************************************
"H�tantos burros mandando em homens de intelig�cia que � vezes fico 
pensando que a burrice �uma Ci�cia".
Ruy Barbosa
*************************************