Kernel panic 2.6.16-1.2096_FC5 - aacraid

David Kredba kredba at math.cas.cz
Tue May 2 10:50:14 UTC 2006


Hello.

I have there kernel panic with kernel 2.6.16-1.2096_FC5 on x86_64 hardware.
It is based on Intel Corporation E7230, CPU Intel(R) Pentium(R) D CPU 
2.80GHz, 2 GB RAM.

There is Adaptec AAR 2420SA with RAID 5.


Server runs fine without users about 14 days and about 2.5 day with 
normal user load.


Server freezes yesterday morning, there is nothing suspect in log files,
except the clamd (0.88.1) crash on some HTML_phishing_bank ... (upgraded 
to 0.88.2).

Magic SysRq turned off.


I have this screenshot :

Badness in panic at kernel/panic.c:140 (Not tainted)

Call Trace: <IRQ> <ffffffff801321a0>{panic+488} {_spin_unlock_irq+12}
<ffffffff8033aefe>{__down_read+52}<ffffff8033b58e>{_spin_lock_irqsave+9)
<ffffffff8020168e>{__up_read+19} <ffffffff80135977>{do_exit+140}
<ffffffff8010c1ec>{kernel_math_error+0}<ffffffff8010c779>{do_invalid_op+163}
<ffffffff880440d8>{:aacraid:aac_intr_normal+411}<ffffffff8033b58e>{_spin_lock_irqsave+9}
<ffffffff88006e07>{:scsi_mod:scsi_run_queue+361}<ffffffff8010b6f9>{error_exit+0}
<ffffffff80339cbe>{thread_return+0}<ffffffff880440d8>{:aacraid:aac_intr_normal+411}
<ffffffff880304d3>{:sd_mod:sd_rw_intr+589}<ffffffff8804529b>{aacraid:aac_rktt_intr+55}
<ffffffff8015a30c>{handle_IRQ_event+414}<ffffffff8015a3d9>{__do_IRQ+156}
<ffffffff8010ce01>{do_IRQ+59}<ffffffff801098b2>{mwait_idle+0}
<ffffffff8010ad3e>{ret_from_intr+0}<EOI><ffffffff801098b2>{mwait_idle+0}
<ffffffff80339cbe>{thread_return+0}<ffffffff801098e8>{mwait_idle+54}
<ffffffff8010988f>{cpu_idle+151}<ffffffff8053a81b>{start_kernel+470}
<ffffffff8053a298>{_sinittext+664}


Has anybody seen this before? Is there a workaround or patch?
Is failing the AAR2420?
I flashed the RAID using latest firmware build nr. 8832 after the crash.


Thank you, David Kredba


lsmod :

Module                  Size  Used by
nls_utf8               35265  0
ncpfs                  88673  0
nfs                   251289  1
nfsd                  286249  17
exportfs               38977  1 nfsd
lockd                  96977  3 nfs,nfsd
nfs_acl                36801  2 nfs,nfsd
sunrpc                192137  13 nfs,nfsd,lockd,nfs_acl
autofs4                55241  1
hidp                   83137  2
l2cap                  91585  5 hidp
bluetooth             116933  2 hidp,l2cap
ipv6                  398689  127
ipx                    95497  0
p8023                  35265  1 ipx
dm_mirror              54593  0
dm_mod                 90385  1 dm_mirror
video                  50505  0
button                 40545  0
battery                43337  0
ac                     38473  0
lp                     47633  0
parport_pc             62697  0
parport                74061  2 lp,parport_pc
floppy                100617  0
nvram                  42441  0
sg                     69097  0
ehci_hcd               65229  0
uhci_hcd               65505  0
e1000                 141869  0
i2c_i801               42581  0
i2c_core               57409  1 i2c_i801
ext3                  164177  6
jbd                    93545  1 ext3
ata_piix               44357  0
libata                 93913  1 ata_piix
aacraid                92353  7
sd_mod                 50753  8
scsi_mod              181137  4 sg,libata,aacraid,sd_mod

lspci -vv :

00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
         Latency: 0
         Capabilities: [e0] Vendor Specific Information

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 1 (rev 01) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
         Memory behind bridge: 88000000-882fffff
         Prefetchable memory behind bridge: 
0000000088600000-0000000088600000
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
         BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
         Capabilities: [40] Express Root Port (Slot+) IRQ 0
                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s unlimited, L1 unlimited
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                 Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, 
Port 1
                 Link: Latency L0s <1us, L1 <4us
                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                 Link: Speed 2.5Gb/s, Width x4
                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ 
Surpise+
                 Slot: Number 1, PowerLimit 25.000000
                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
                 Root: Correctable- Non-Fatal- Fatal- PME-
         Capabilities: [80] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-
                 Address: 00000000  Data: 0000
         Capabilities: [90] #0d [0000]
         Capabilities: [a0] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [100] Virtual Channel
         Capabilities: [180] Unknown (5)

00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI 
Express Port 5 (rev 01) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
         BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
         Capabilities: [40] Express Root Port (Slot+) IRQ 0
                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s unlimited, L1 unlimited
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, 
Port 5
                 Link: Latency L0s <1us, L1 <4us
                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                 Link: Speed 2.5Gb/s, Width x1
                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ 
Surpise+
                 Slot: Number 5, PowerLimit 10.000000
                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
                 Root: Correctable- Non-Fatal- Fatal- PME-
         Capabilities: [80] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-
                 Address: 00000000  Data: 0000
         Capabilities: [90] #0d [0000]
         Capabilities: [a0] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [100] Virtual Channel
         Capabilities: [180] Unknown (5)

00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI 
Express Port 6 (rev 01) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
         I/O behind bridge: 00002000-00002fff
         Memory behind bridge: 88400000-884fffff
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
         BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
         Capabilities: [40] Express Root Port (Slot+) IRQ 0
                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s unlimited, L1 unlimited
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, 
Port 6
                 Link: Latency L0s <256ns, L1 <4us
                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                 Link: Speed 2.5Gb/s, Width x1
                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ 
Surpise+
                 Slot: Number 6, PowerLimit 10.000000
                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
                 Root: Correctable- Non-Fatal- Fatal- PME-
         Capabilities: [80] Message Signalled Interrupts: 64bit- 
Queue=0/0 Enable-
                 Address: 00000000  Data: 0000
         Capabilities: [90] #0d [0000]
         Capabilities: [a0] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [100] Virtual Channel
         Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#1 (rev 01) (prog-if 00 [UHCI])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin A routed to IRQ 21
         Region 4: I/O ports at 3080 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#2 (rev 01) (prog-if 00 [UHCI])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin B routed to IRQ 18
         Region 4: I/O ports at 3060 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#3 (rev 01) (prog-if 00 [UHCI])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin C routed to IRQ 19
         Region 4: I/O ports at 3040 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#4 (rev 01) (prog-if 00 [UHCI])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin D routed to IRQ 17
         Region 4: I/O ports at 3020 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 01) (prog-if 20 [EHCI])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin A routed to IRQ 21
         Region 0: Memory at 88500400 (32-bit, non-prefetchable) [size=1K]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 
01 [Subtractive decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
         I/O behind bridge: 00001000-00001fff
         Memory behind bridge: 88300000-883fffff
         Prefetchable memory behind bridge: 
0000000080000000-0000000087f00000
         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
         BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
         Capabilities: [50] #0d [0000]

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge (rev 01)
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE 
Controller (rev 01) (prog-if 8a [Master SecP PriP])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin A routed to IRQ 19
         Region 0: I/O ports at <unassigned>
         Region 1: I/O ports at <unassigned>
         Region 2: I/O ports at <unassigned>
         Region 3: I/O ports at <unassigned>
         Region 4: I/O ports at 30b0 [size=16]

00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) 
Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 8f [Master SecP 
SecO PriP PriO])
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR- FastB2B-
         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin B routed to IRQ 18
         Region 0: I/O ports at 30c8 [size=8]
         Region 1: I/O ports at 30e4 [size=4]
         Region 2: I/O ports at 30c0 [size=8]
         Region 3: I/O ports at 30e0 [size=4]
         Region 4: I/O ports at 30a0 [size=16]
         Region 5: Memory at 88500000 (32-bit, non-prefetchable) [size=1K]
         Capabilities: [70] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
(rev 01)
         Subsystem: Intel Corporation Unknown device 346a
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin B routed to IRQ 10
         Region 4: I/O ports at 3000 [size=32]

01:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge 
A (rev 09) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
         Memory behind bridge: 88000000-882fffff
         Prefetchable memory behind bridge: 
0000000088600000-0000000088600000
         Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
         BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
         Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
                 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s <64ns, L1 <1us
                 Device: AtnBtn- AtnInd- PwrInd-
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                 Device: MaxPayload 512 bytes, MaxReadReq 512 bytes
                 Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
                 Link: Latency L0s unlimited, L1 unlimited
                 Link: ASPM Disabled CommClk- ExtSynch-
                 Link: Speed 2.5Gb/s, Width x8
         Capabilities: [5c] Message Signalled Interrupts: 64bit+ 
Queue=0/0 Enable-
                 Address: 0000000000000000  Data: 0000
         Capabilities: [6c] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [d8] PCI-X bridge device
                 Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- 
Freq=133MHz
                 Status: Dev=01:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                 Upstream: Capacity=65535 CommitmentLimit=65535
                 Downstream: Capacity=65535 CommitmentLimit=65535
         Capabilities: [100] Advanced Error Reporting
         Capabilities: [300] Power Budgeting

02:02.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02)
         Subsystem: Adaptec ASR-2420SA
         Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (250ns min, 250ns max), Cache Line Size 10
         Interrupt: pin A routed to IRQ 20
         Region 0: Memory at 88000000 (64-bit, non-prefetchable) [size=2M]
         Region 2: Memory at 88200000 (64-bit, non-prefetchable) [size=4K]
         Expansion ROM at 88600000 [disabled] [size=32K]
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [48] Message Signalled Interrupts: 64bit+ 
Queue=0/2 Enable-
                 Address: 0000000000000000  Data: 0000
         Capabilities: [58] PCI-X non-bridge device
                 Command: DPERE- ERO- RBC=512 OST=16
                 Status: Dev=02:02.0 64bit+ 133MHz+ SCD- USC- DC=simple 
DMMRBC=4096 DMOST=2 DMCRS=128 RSCEM- 266MHz- 533MHz-
         Capabilities: [60] Vital Product Data

04:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet 
Controller (Copper) (rev 03)
         Subsystem: Intel Corporation Unknown device 30a2
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Interrupt: pin A routed to IRQ 16
         Region 0: Memory at 88480000 (32-bit, non-prefetchable) [size=128K]
         Region 1: Memory at 88400000 (32-bit, non-prefetchable) [size=512K]
         Region 2: I/O ports at 2000 [size=32]
         Capabilities: [c8] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-
         Capabilities: [d0] Message Signalled Interrupts: 64bit+ 
Queue=0/0 Enable-
                 Address: 0000000000000000  Data: 0000
         Capabilities: [e0] Express Endpoint IRQ 0
                 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s <512ns, L1 <64us
                 Device: AtnBtn- AtnInd- PwrInd-
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                 Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, 
Port 0
                 Link: Latency L0s <128ns, L1 <64us
                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                 Link: Speed 2.5Gb/s, Width x1
         Capabilities: [100] Advanced Error Reporting
         Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00

04:00.2 IDE interface: Intel Corporation Unknown device 108d (rev 03) 
(prog-if 85 [Master SecO PriO])
         Subsystem: Intel Corporation Unknown device 0000
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Interrupt: pin B routed to IRQ 11
         Region 0: I/O ports at 2040 [size=8]
         Region 1: I/O ports at 2050 [size=4]
         Region 2: I/O ports at 2038 [size=8]
         Region 3: I/O ports at 204c [size=4]
         Region 4: I/O ports at 2020 [size=16]
         Capabilities: [c8] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
         Capabilities: [d0] Message Signalled Interrupts: 64bit+ 
Queue=0/0 Enable-
                 Address: 0000000000000000  Data: 0000
         Capabilities: [e0] Express Legacy Endpoint IRQ 0
                 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s <512ns, L1 <64us
                 Device: AtnBtn- AtnInd- PwrInd-
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, 
Port 0
                 Link: Latency L0s <128ns, L1 <64us
                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                 Link: Speed 2.5Gb/s, Width x1
         Capabilities: [100] Advanced Error Reporting
         Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00

04:00.3 Serial controller: Intel Corporation Unknown device 108f (rev 
03) (prog-if 02 [16550])
         Subsystem: Intel Corporation Unknown device 0000
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Interrupt: pin C routed to IRQ 18
         Region 0: I/O ports at 2030 [size=8]
         Region 1: Memory at 884a1000 (32-bit, non-prefetchable) [size=4K]
         Capabilities: [c8] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
         Capabilities: [d0] Message Signalled Interrupts: 64bit+ 
Queue=0/0 Enable-
                 Address: 0000000000000000  Data: 0000
         Capabilities: [e0] Express Endpoint IRQ 0
                 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s <512ns, L1 <64us
                 Device: AtnBtn- AtnInd- PwrInd-
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, 
Port 0
                 Link: Latency L0s <128ns, L1 <64us
                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                 Link: Speed 2.5Gb/s, Width x1
         Capabilities: [100] Advanced Error Reporting
         Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00

04:00.4 Class 0c07: Intel Corporation Unknown device 108e (rev 03) 
(prog-if 01)
         Subsystem: Intel Corporation Unknown device 0000
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size 10
         Interrupt: pin D routed to IRQ 11
         Region 0: Memory at 884a0000 (32-bit, non-prefetchable) [size=4K]
         Region 1: I/O ports at 2048 [size=4]
         Capabilities: [c8] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
         Capabilities: [d0] Message Signalled Interrupts: 64bit+ 
Queue=0/0 Enable-
                 Address: 0000000000000000  Data: 0000
         Capabilities: [e0] Express Endpoint IRQ 0
                 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, 
ExtTag-
                 Device: Latency L0s <512ns, L1 <64us
                 Device: AtnBtn- AtnInd- PwrInd-
                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, 
Port 0
                 Link: Latency L0s <128ns, L1 <64us
                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                 Link: Speed 2.5Gb/s, Width x1
         Capabilities: [100] Advanced Error Reporting
         Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00

05:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 
(prog-if 00 [VGA])
         Subsystem: Intel Corporation Unknown device 515e
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (2000ns min), Cache Line Size 10
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at 80000000 (32-bit, prefetchable) [size=128M]
         Region 1: I/O ports at 1000 [size=256]
         Region 2: Memory at 88340000 (32-bit, non-prefetchable) [size=64K]
         Expansion ROM at fffe0000 [disabled] [size=128K]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit 
Ethernet Controller (rev 05)
         Subsystem: Intel Corporation Unknown device 30a1
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (63750ns min), Cache Line Size 10
         Interrupt: pin A routed to IRQ 16
         Region 0: Memory at 88320000 (32-bit, non-prefetchable) [size=128K]
         Region 1: Memory at 88300000 (32-bit, non-prefetchable) [size=128K]
         Region 2: I/O ports at 1100 [size=64]
         Expansion ROM at 88360000 [disabled] [size=128K]
         Capabilities: [dc] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-
         Capabilities: [e4] PCI-X non-bridge device
                 Command: DPERE- ERO+ RBC=512 OST=1
                 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple 
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-




More information about the fedora-list mailing list