need FSCK help!
Lonni J Friedman
netllama at gmail.com
Tue Oct 3 02:27:56 UTC 2006
According to the output below, you've never run any self-tests on the
drive. That brings into question how accurate your results are.
On 10/2/06, Claude Jones <claude_jones at levitjames.com> wrote:
> On Mon October 2 2006 2:01 pm, Markku Kolkka wrote:
> > The disk isn't offline, this refers to S.M.A.R.T off-line
> > testing (testing in background when the disk is idle). See "man
> > smartctl".
> >
>
> If I read the instrux correctly, this is my smartctl report - it
> states that it's passing an overall-health self-assessment test -
> does it seem like there's anything to indicate this drives in
> trouble? It is practically brand new.
>
> smartctl -a /dev/sda -d ata
> smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6
> Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
> Device Model: ST3160023AS
> Serial Number: 3JS0JS3W
> Firmware Version: 3.05
> User Capacity: 160,041,885,696 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 6
> ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
> Local Time is: Mon Oct 2 22:12:31 2006 EDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x82) Offline data collection
> activity
> was completed without
> error.
> Auto Offline Data
> Collection: Enabled.
> Self-test execution status: ( 0) The previous self-test
> routine completed
> without error or no
> self-test has ever
> been run.
> Total time to complete Offline
> data collection: ( 430) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline
> immediate.
> Auto Offline data
> collection on/off support.
> Suspend Offline collection
> upon new
> command.
> Offline surface scan
> supported.
> Self-test supported.
> No Conveyance Self-test
> supported.
> Selective Self-test
> supported.
> SMART capabilities: (0x0003) Saves SMART data before
> entering
> power-saving mode.
> Supports SMART auto save
> timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging
> support.
> Short self-test routine
> recommended polling time: ( 1) minutes.
> Extended self-test routine
> recommended polling time: ( 111) minutes.
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 056 050 006 Pre-fail
> Always - 33286965
> 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail
> Always - 0
> 4 Start_Stop_Count 0x0032 100 100 020 Old_age
> Always - 0
> 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail
> Always - 918381576
> 9 Power_On_Hours 0x0032 081 081 000 Old_age
> Always - 17136
> 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
> Always - 0
> 12 Power_Cycle_Count 0x0032 099 099 020 Old_age
> Always - 1790
> 194 Temperature_Celsius 0x0022 031 056 000 Old_age
> Always - 31
> 195 Hardware_ECC_Recovered 0x001a 056 049 000 Old_age
> Always - 33286965
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age
> Always - 1
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
> Offline - 1
> 199 UDMA_CRC_Error_Count 0x003e 200 197 000 Old_age
> Always - 3
> 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
> Offline - 0
> 202 TA_Increase_Count 0x0032 100 253 000 Old_age
> Always - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use:
> smartctl -t]
>
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of
> disk.
> If Selective self-test is pending on power-up, resume after 0
> minute delay.
>
> > > Is FSCK the right tool for this?
> >
> > No. Fsck is for correcting logical errors in the filesystem,
> > this is a hardware problem in the disk drive. Back up all data
> > and replace the drive.
>
>
>
> --
> Claude Jones
> Brunswick, MD, USA
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman netllama at gmail.com
LlamaLand http://netllama.linux-sxs.org
More information about the fedora-list
mailing list