[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Ide error under kernel 2.6.18-1.2200.fc5



I have a similar problem but with my DVD drive:

# dmesg |grep DVD
hda: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

dmesg shows:

ide-cd: cmd 0x1e timed out
hda: lost interrupt
hda: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hda: read_intr: Drive wants to transfer data the wrong way!
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd8 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
hda: drive not ready for command
hda: ATAPI reset complete
ide-cd: cmd 0x1e timed out
hda: lost interrupt
hda: packet command error: status=0xeb { Busy }
ide: failed opcode was: unknown
hda: status error: status=0xeb { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: ATAPI reset complete
hda: status error: status=0x08 { DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: ATAPI reset complete
hda: status error: status=0x00 { }
ide: failed opcode was: unknown
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP Deflate Compression module registered


# lspci
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02) 00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV38 [GeForce FX 5950 Ultra] (rev a1) 02:01.0 Ethernet controller: Intel Corporation 82547EI Gigabit Ethernet Controller (LOM) 03:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 03:04.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02) 03:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
03:0b.0 PCI bridge: Intel Corporation 21152 PCI-to-PCI Bridge
03:0c.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 03:0c.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 04:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 04:09.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)


Albert.


Olaf Mueller wrote:
Hello,

the following error happened after upgrading to kernel
2.6.18-1.2200.fc5:

kernel: hda: status timeout: status=0x80 { Busy }
kernel: ide: failed opcode was: unknown
kernel: hda: DMA disabled
kernel: hdb: DMA disabled
kernel: hda: drive not ready for command
kernel: ide0: reset: success

This problem never happens under the previous kernel 2.6.17-1.2187_FC5.
Is this a known problem of the new kernel?



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]