[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: NMI received for unknown reason 29 on CPU 0.



At 7:36 PM +0200 9/5/06, Mitja Mihelic wrote:

Tony Nelson wrote:

WAG: is the CPU too hot?

I set up the sensors, and if they are reading the values correctly,
the CPU temperature is between 50 and 58 degrees centigrade.

OK, then it's not too hot. If it were overheating, you'd see the temperature rise and then the problem.

The board temp. is at about 35 and "remote" is now at 48 degrees centigrade.
But the threshold for alarm is set to 50°C for CPU and 35°C for
board and remote.
Could it be that the system thinks there's real danger and tries to
do some action
to cool the CPU ?

Seems possible, though the voltage alarm at least doesn't do anything here. Try increasing the alarm thresholds.
--
____________________________________________________________________
TonyN.:'                       <mailto:tonynelson georgeanelson com>
      '                              <http://www.georgeanelson.com/>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]