view function of Bind 9

[Tim]

On Sun, 2007-04-01 at 23:42 +0800, edwardspl at ita.org.mo wrote:

> Does your system as the following sample ?
> 
> eg : 
> For Public IP ( from ISP ) : 
> IP range : 202.175.123.123 ~ 202.175.123.129 ( I want to use
> 202.175.123.123 trasnfer to 192.168.0.1 Server machine )

Your router needs to associate those last two addresses together.  Are
you using a configurable one?

Depending on your network, you might connect 202.175.123.123 to
192.168.0.1 with rules.  You might set that computer to use
202.175.123.123 as its address, directly.  If you have a series of
public addresses that you can use, you *can* use them directly.

> subnet mask : 255.255.255.240 ( I want to trasnfer to 255.255.255.0 )

Don't know what you mean.

> Router IP : 202.175.123.128 ( So, how to trasnfer to 192.168.0.254,
> due to via the Router machine first ! )

Can't understand that, either.  It's an incoherent mix of words.

How is your network physically set up?  Do you have a modem connected to
a router, connected to a network of computers?  Is the modem a
combination modem and router?  Is your router a "router" or a computer
working as one?  How are the other computers connected?

> For Private IP ( All of Server under LAN environment ) : 
> IP :  192.168.0.1 ( I want to tranfer to 202.175.123.123 ) 
> subnet mask : 255.255.255.0 ( I want to tranfer to 255.255.255.240 ) 
> Router IP : 192.168.0.254 ( I want to tranfer to 202.175.123.128 ) 
> 
> For Client IP ( via NAT + DHCP of the Server ) : 
> Ip : 192.168.1.1 ~ 192.168.1.50

Don't know what you mean.  You want to set up a DHCP server to dole out
those addresses?  You want to enable NAT?

-- 
(This box runs FC6, my others run FC4 & FC5, in case that's
 important to the thread.)

Don't send private replies to my address, the mailbox is ignored.
I read messages from the public lists.