FC6 (&7) netboot

[Stefan van der Eijk]

On 4/30/07, Kam Leo <kam.leo at gmail.com> wrote:
> On 4/30/07, Stefan van der Eijk <stefan at eijk.nu> wrote:
> > Hi,
> >
> > I'm trying to get FC6 working on a diskless system. I hope this is the
> > correct list to discuss this topic, if not please ignore this message.
> >
> > As I mentioned, I'm trying to get FC6 to work in a diskless system. To
> > do this I first installed FC6 in a VMware (with disk). I'm using that
> > as the "example" system.
> >
> > I'm following the instructions provided in the documentation of the
> > system-config-netboot-0.1.41-1.FC6 package. After rsyncing over the
> > files to the NFS server, setting up DHCP and TFTP servers it's time
> > for the first attempt. The diskless client is a vmware, confgured to
> > boot over the network (PXE).
> >
> > With the first attempt, the system stops with the following error:
> > "Mounting rot filesystem: /nfsroots/fc6-diskless/root from 192.168.254.254
> > mount: wrong fs type, bad option, bad superblock on
> > 192.168.254.254:/nfsroots/fc6-diskless/root,
> > missing codepage r other error
> > In some cases useful info is found in syslog - try dmesg | tail  or
> > so."
> >
> > For screenshot see: http://eijk.homelinux.org/~stefan/fc-diskless/1.jpg
> >
> > As mentioned in
> > http://www.mythtv.org/wiki/index.php/Diskless_Frontend#Redhat_and_Fedora_Core
> > /sbin/mount.nfs is missing in the initrd.img. This patch adds it
> > (although I'm not sure if mount.nfs4 should be added too):
> >
> > # diff -ur /usr/share/system-config-netboot/diskless/updateDiskless.orig
> > /usr/share/system-config-netboot/diskless/updateDiskless
> > --- /usr/share/system-config-netboot/diskless/updateDiskless.orig
> >  2007-04-29 23:18:24.000000000 +0200
> > +++ /usr/share/system-config-netboot/diskless/updateDiskless
> > 2007-04-29 23:18:50.000000000 +0200
> > @@ -114,7 +114,7 @@
> >  done;
> >  #/bin/cp "$ROOT"/usr/share/hwdata/pcitable $MNTPOINT/usr/share/hwdata/ || die;
> >  # disklessrc now uses modules.pcimap, not pcitable
> > -BINS="/sbin/busybox.anaconda /sbin/insmod /sbin/modprobe /sbin/rmmod
> > /sbin/dhclient /bin/bash /bin/mount /sbin/route /sbin/ip /usr/bin/expr
> > /sbin/lspci /sbin/ifconfig /sbin/consoletype /sbin/pivot_root
> > /bin/hostname /bin/domainname /usr/bin/host"
> > +BINS="/sbin/busybox.anaconda /sbin/insmod /sbin/modprobe /sbin/rmmod
> > /sbin/dhclient /bin/bash /bin/mount /sbin/mount.nfs /sbin/mount.nfs4
> > /sbin/route /sbin/ip /usr/bin/expr /sbin/lspci /sbin/ifconfig
> > /sbin/consoletype /sbin/pivot_root /bin/hostname /bin/domainname
> > /usr/bin/host"
> >  # Set up links to all the busybox functions -
> >  # may be different for different versions of busybox!
> >  if [ ! -e $ROOT/sbin/busybox.anaconda ]; then
> >
> > 2nd attempt ended with it complaining that it couldn't pivot_root.
> > Seems that /.oldroot directory isn't created. For screenshot see:
> > http://eijk.homelinux.org/~stefan/fc-diskless/2.jpg
> >
> > After making that directory it also complains that /.snapshot isn't
> > made either. Starting udev takes ages,
> > http://eijk.homelinux.org/~stefan/fc-diskless/3.jpg
> >
> > I didn't wait for it to finish, just made the directory on the NFS
> > server and reset the vmware.
> >
> > http://eijk.homelinux.org/~stefan/fc-diskless/4.jpg
> >
> > After re-reading the .html pages in
> > /usr/share/doc/system-config-netboot-0.1.41/ I followed the
> > instructions to create a client. Changed the pxe config to reflect
> > this.
> >
> > label fc6
> >         KERNEL vmlinuz
> >         APPEND initrd=initrd.img root=/dev/ram0 init=disklessrc
> > NFSROOT=192.168.254.254:/nfsroots/fc6-diskless ramdisk_size=19102
> > ETHERNET=eth0 SNAPSHOT=fc6-diskless
> >
> > resulting in this: http://eijk.homelinux.org/~stefan/fc-diskless/5.jpg
> >
> > added "ramdisk_blocksize=1024", from
> > http://www.mythtv.org/wiki/index.php/Diskless_Frontend#Redhat_and_Fedora_Core
> >
> > The end result is a FC6 diskless client that hangs on starting udev.
> > http://eijk.homelinux.org/~stefan/fc-diskless/6.jpg
> >
> > I'm wondering what I've missed in the documentation and what I'm doing
> > wrong. I feel that I'm already correcting too many things myself -->
> > this stuff should be made in a way that it just works and is trivial
> > to set up. As the package version/release is still the same in
> > rawhide, I guess this same package is going to be shipped with FC7.
> >
> > What would be the best way to move forward? Shall I start with filing
> > some bugreports? Or is this not the right time to do so (freeze for
> > fc7)?
> >
> > with kind regards,
> >
> > Stefan van der Eijk
>
> Have you considered using Linux Terminal Server,
> http://sourceforge.net/projects/ltsp/ ?

No, I didn't, I was expecting (!!) that the redhat tools would be able
to do the job.

Are there ltsp packages available in Fedora or would I need to cook my own?