F8 and IOMEGA usb storage

[Rick Stevens]

On Wed, 2007-12-19 at 17:59 +0100, Luc MAIGNAN wrote:
> Hi list,
> 
> I've put an external IOMEGA usb storage disk (35 GB removable disks) 
> behind a F8 box.
> The system seems to recognize the usb device, like the 
> /proc/bus/usb/devices says :
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=059b ProdID=0042 Rev= 8.22
> S:  Manufacturer=Iomega
> S:  Product=USB RRD
> S:  SerialNumber=AC6F95CC1237
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  4mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> 
> 
> But in /dev/usb* I don't see any block device, so I don't know how to 
> mount it.
> 
> Anyone has an idea ?

Remember that in F8 ALL storage is treated as SCSI, so your drive will
appear as /dev/sdb or /dev/sdc or something like that.  "fdisk -l" as
root will display all your drives.  Try that.

----------------------------------------------------------------------
- Rick Stevens, Principal Engineer             rstevens at internap.com -
- CDN Systems, Internap, Inc.                http://www.internap.com -
-                                                                    -
-        Change is inevitable, except from a vending machine.        -
----------------------------------------------------------------------