FC5 fails to boot with BT878 card
Jim Duda
jim at duda.tzo.com
Sun Feb 11 15:43:28 UTC 2007
Tim,
Thanks for the response. I've tried different slots as well as
reseating the card. Still, no luck.
I'm sure I change something in the driver setup, etc. I'm just
struggling to figure out how to find where udev is getting stuck.
I found a post where I can change the udev log output to "debug"
using /etc/udev/udev.conf I'm going to try rebooting with logging to
hopefully determine why it's getting stuck.
Jim
Tim wrote:
> On Fri, 2007-02-09 at 09:07 -0500, Jim Duda wrote:
>> I moved the card to another FC5 box, and the system boots okay. So, I
>> believe the card is still good.
>
> Did you try putting it back in the problem box? It could have been a
> problem of the card being mis-seated, they can shift around, especially
> if you move a box, or it goes through temperature changes.
>
> It can be worth trying a card in a different slot, some slots share
> IRQs, and some things do not share nicely. Changes in software, over
> time, may have had an effect on how well things share.
>
More information about the fedora-list
mailing list