Sensors and recent motherboards

[Anne Wilson]

On Saturday 06 January 2007 22:58, Paulo Cavalcanti wrote:
> > For a moment I thought I had struck gold :-)  There is a link to
> > http://www.lm-sensors.org/wiki/Configurations
> > <http://www.lm-sensors.org/wiki/Configurations> and there, sure enough,
> > is a configuration file for Abit KV8Pro.  Unfortunately, although I
> > replaced the old config file with this, I still get the same (lack of)
> > readings.
> >
> > Nevertheless, this page is worthy of a bookmark, I think.
>
> Every time you change /etc/sensors.conf
>
> you have to run (as root)
>
> sensors -s
>
> Otherwise, you will not use the new file, until you reboot.
>
> Another file to look at is:
>
> /etc/sysconfig/lm_sensors
>
> which holds the modules to be loaded for your board.
> It can be (re)created using (as root),
>
> /usr/sbin/sensors-detect
>
> and answering yes to all questions.
>
Done all that before, Paulo.  No joy.

> As a final remark, ATrpms has an updated version of the lm_sensors rpm.
> It does not hurt to try.

OK - today I installed this upgrade.  Sensors-detect seemed to find more than 
previously, but 'sensors' still shows

fan1:        0 RPM  (min =    0 RPM, div = 128)              ALARM  (beep)
fan2:        0 RPM  (min =    0 RPM, div = 128)              ALARM  (beep)
fan3:        0 RPM  (min =    0 RPM, div = 128)              ALARM  (beep)
temp1:        -1°C  (high =    -1°C, hyst =    -1°C)   sensor = diode   ALARM   
(beep)
temp2:      +0.0°C  (high =    +0°C, hyst =    +0°C)   sensor = diode   ALARM   
(beep)
temp3:      +0.0°C  (high =    +0°C, hyst =    +0°C)   sensor = diode   ALARM   
(beep)

Anne
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20070108/57aae983/attachment-0001.sig>