[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[SOLVED] Netdev - Error on ETH


I have i computer figuring as a router, on which i have 3 nics
installed. 2 working flawlessy, one is producing errors:

NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 0d 0004 c07f media 00.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 0008a0e5. (queue head)
eth1:  Tx descriptor 1 is 0008a0de.
eth1:  Tx descriptor 2 is 0008a0e5.
eth1:  Tx descriptor 3 is 0008a0de.
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1

i was googling, just finding something about interrupts. I changed the
interrupt of eth1 to 9 (acpi), no help. 

can anybody figure out or has some hints that i could try?

my /proc/interrupts:

[root trinity proc]# more interrupts
  0:     593132          XT-PIC  timer
  1:        952          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:          1          XT-PIC  CS4231
  6:          5          XT-PIC  floppy
  7:          1          XT-PIC  parport0
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:          1          XT-PIC  eth1
 11:      12470          XT-PIC  uhci_hcd:usb1, eth0, eth2
 12:      15173          XT-PIC  i8042
 14:      13840          XT-PIC  ide0
 15:      36367          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0

so, i get some sun now, otherwise i get eyes like gollum :)


Setting acpi=off in the kernel-bootline in /etc/grub.conf did the
trick. its working now.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]