[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: FC6 Blender and Nvidia drivers



2007/1/20, Jonathan Berry <berryja gmail com>:
On 1/19/07, Lonni J Friedman <netllama gmail com> wrote:
> On 1/19/07, Dmitriy Kropivnitskiy <nigde mitechki net> wrote:
> > Lonni J Friedman wrote:
> > > /etc/X11/xorg.conf
> > > The GLX module is normally included, however your xorg.conf is
> > > completely lacking the modules section.  You'd need to tell us how
> > > that happened as its not the normal state of affairs.
> >
> > Actually there is nothing abnormal about it. In a lot of configs Xorg will start perfectly without any config file at all. It is the NVIDIA modules
> > that require you to load GLX for the 3D stuff to work.
>
> And any other X driver which needs GLX support.

Actually... well, I'm no expert, but I can tell you my experience :-).
 3D, AIGLX, etc all work fine for me and this is my xorg.conf:

# Xorg configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
        ModulePath   "/usr/lib64/xorg/modules"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "Device"

#       Option      "ModeValidation" "NoEdidDFPMaxSizeCheck"
        Identifier  "Videocard0"
        Driver      "nvidia"
        Option      "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

No modules section.  I do notice that I have the line:
       ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
in the "Files" section that Antonio did not have.  Perhaps he now has
that and that is why it is working.  The xorg.conf file has gotten
much smaller in recent times.  A change that is very welcome indeed.

Jonathan

--
fedora-list mailing list
fedora-list redhat com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list


My working xorg.conf file is now (too late last night to post it).Tnx everybody

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules/extensions/nvidia"
	ModulePath   "/usr/lib/xorg/modules"
EndSection

Section "InputDevice"

   # generated from data in "/etc/sysconfig/mouse"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	ModelName    "Philips 107B(17inch/CM6800)"
### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 69.0
	VertRefresh  50.0 - 130.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	Option	    "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection
--
Antonio Montagnani
Skype : antoniomontag


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]