FC6 install : DVD boots but Anaconda never starts
Kam Leo
kam.leo at gmail.com
Thu May 10 05:33:16 UTC 2007
On 5/9/07, Ada Ho <ada_ho2003 at sbcglobal.net> wrote:
>
>
>
>
> I am attempting to install Linux on a new machine.
>
> I boot the Linux (FC6) DVD.
>
> Vliminuz boots, and gives the : Command prompt.
>
>
>
> No matter what "linux <argument>" command I give, the response is the same.
>
> I have tried "linux rescue", "linux noprobe", "linux nomraid", as well as
> all of the optional arguments that are listed by the F2 key. After entering
> "linux <argument>" or simply waiting, I see a list of hardware drivers,
> followed by the access of
>
> Three appropriate drivers for this machine. Then the screen goes blue with
> the text:
>
> <Welcome to Fedora Core>
>
> (and at the bottom of the screen)
>
> "<TAB /Alt-Tab> between elements | <Space> select | F12 next screen"
>
>
>
> Anaconda never runs, and the only response to the keyboard is to reboot to
> <alt><control><delete>
>
> Other than that, this system is dead until you reboot.
>
>
>
> Everything works fine when I am running XP. I have never had any problems
> with the DVD/RW
>
> Except when I try to install FC6.
>
>
>
> Can anyone tell me what is going on? IN all my worldly ignorance, I do not
> understand.
>
> Is it the chipset? Is it the way the drives are configured in BIOS? Is it
> that FC6 does have the
>
> Proper drivers?
>
>
>
> Here are the gory details of the system specs of the machine:
>
>
>
> Motherboard: ASUS P5WD2
>
> Chipset: 955X
>
> Hd: Seagate ST3250824AS
>
> Video: GeForce 6600
>
> DVD/ CD Rom Drives Sony DVD RW DW-Q120A
>
> Sony DVD ROM DDU1615
>
> DE ATA/ ATAPI controllers
>
> Intel 82801
> GB Serial ATA Storage Controller 27C0
>
> Intel 82801
> GB Ultra ATA Storage Controller 27DF
>
> IEEE 1394 Bus Host Controllers
>
> Texas Instruments OHCI Compliant IEEE 1394 Host Controller
>
> Processors: Two Pentium D 3.00 GhZ
>
>
>
> The BIOS configuration is such that:
>
>
>
> First boot device: Sonly DVD RW DV-Q120A
>
> Second boot defince: PM-ST205082AS (the Seagate hd)
>
>
>
> BIOS setup is :
>
> Primary IDE Master – ST20582AS (Seagate hd)
>
> No primary slave
>
>
>
> Secondary IDE Master – no secondary
>
> Secondary IDE Slave – no secondary
>
>
>
> Third IDE Master – DVD RW DV-Q120A
>
> Third IDE Slave – Sony DVD Rom DDU 16
>
>
>
> Configure SATA as standard (AHCI and RAID not selected)
>
> Onboard IDE Operatational Mode: Enhanced Mode (Compatible mode, enhanced
> mode not selected)
>
>
>
> Enhanced Mode Support on [S+ATA+P-ATA]
>
> (S-ATA and P-ATA not selected)
>
>
Try moving your CD/DVD drives to the 2nd IDE channel.
More information about the fedora-list
mailing list