Serial Port Bug?
Karl Larsen
k5di at zianet.com
Wed Nov 28 19:43:05 UTC 2007
David Timms wrote:
> Karl Larsen wrote:
>> Wanting a way to test the serial port I recalled minicom and after
>> getting it set up on /dev/ttyS0 it seems happy with Com 1. The old
>> /dev/modem is gone on F7. But now what is a way to drive the serial
>> port pins to a constant plus voltage with minicom?
>
> In minicom it can help {and if only using a 3 wire cable be required}
> to disable the setting where it looks for HW handshaking from the
> remote device:
> | A - Serial Device : /dev/ttyS1
> | B - Lockfile Location : /var/lock
> | E - Bps/Par/Bits : 9600 8N1 | F - Hardware Flow Control
> : No
> | G - Software Flow Control : No
>
> If you are using a cable with more than 3 wires, you might need to
> check that the DTR, DSR lines a wired up appropriately - ie that the
> remote device is not incorrectly telling your computer that it is not
> ready.
>
> A simple trick is to connect pins 2 and 3 {transmit and receive}
> directly on your serial port, and see if you get characters typed
> echoed back ?
>
> DaveT.
>
Excellent Dave! I have an extension cable on the serial port so that
will be easy :-)
Get back to with results soon.
The results are with pin 2 and 3 shorted together minicom still did not
print what I pressed. I turned on local echo and I see what I type but
with the pin 2 and 3 shorted I still get just one letter.
--
Karl F. Larsen, AKA K5DI
Linux User
#450462 http://counter.li.org.
More information about the fedora-list
mailing list