Eth 1 problem in FC7

[Mikkel L. Ellertson]

david walcroft wrote:
> How do I troubleshoot this failure
> I put in a new Ethernet card and this is the result.
> 
> [david at reddwarf ~]$ sudo service network restart
> Shutting down interface eth0:                              [  OK  ]
> Shutting down interface eth1:                              [  OK  ]
> Shutting down loopback interface:                          [  OK  ]
> Disabling IPv4 packet forwarding:  net.ipv4.ip_forward = 0
>                                                            [  OK  ]
> SIOCGIFFLAGS: No such device
> Bringing up loopback interface:                            [  OK  ]
> Bringing up interface eth0:
> Determining IP information for eth0... done.
>                                                            [  OK  ]
> Bringing up interface eth1:
> Determining IP information for eth1... failed.
>                                                            [FAILED]
>
More information about your network would help. Is there a DHCP
server on the network eth1 is connected to? Also, is the cable
plugged in all the way on the card? I know it is a dumb question,
but it happens, so it pays to double check.

Also, are you replacing a card, or adding a card? If you are
replacing a card, you may have a line in ifcfg-eth1 that looks
something like "HWADDR=00:02:A5:F4:91:5E". If so, you will need to
remove it, or change it to match the new card. (Long shot - you
should not get to the Determining IP stage if it does not match.)

Mikkel
-- 

  Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: OpenPGP digital signature
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20070905/99c75f84/attachment-0001.sig>