[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Eth 1 problem in FC7

david walcroft wrote:
> How do I troubleshoot this failure
> I put in a new Ethernet card and this is the result.
> [david reddwarf ~]$ sudo service network restart
> Shutting down interface eth0:                              [  OK  ]
> Shutting down interface eth1:                              [  OK  ]
> Shutting down loopback interface:                          [  OK  ]
> Disabling IPv4 packet forwarding:  net.ipv4.ip_forward = 0
>                                                            [  OK  ]
> SIOCGIFFLAGS: No such device
> Bringing up loopback interface:                            [  OK  ]
> Bringing up interface eth0:
> Determining IP information for eth0... done.
>                                                            [  OK  ]
> Bringing up interface eth1:
> Determining IP information for eth1... failed.
>                                                            [FAILED]
More information about your network would help. Is there a DHCP
server on the network eth1 is connected to? Also, is the cable
plugged in all the way on the card? I know it is a dumb question,
but it happens, so it pays to double check.

Also, are you replacing a card, or adding a card? If you are
replacing a card, you may have a line in ifcfg-eth1 that looks
something like "HWADDR=00:02:A5:F4:91:5E". If so, you will need to
remove it, or change it to match the new card. (Long shot - you
should not get to the Determining IP stage if it does not match.)


  Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!

Attachment: signature.asc
Description: OpenPGP digital signature

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]