usb modem MultiTech MT5634ZBA-USB

[Gregory P. Ennis]

On Fri, 2007-09-14 at 23:14 -0400, Neil Cherry wrote:
> Gregory P. Ennis wrote:
> > Everyone,
> > 
> > I am trying to intall a couple Multtech Modems on a F6 system and am
> > having difficulty finding a starting place.  I would like to try my hand
> > with some faxing software, but have not been able to get to the modems.
> > 
> > When I run lsusb I get the following:
> > 
> > 
> > Bus 002 Device 003: ID 06e0:f107 Multi-Tech Systems, Inc.
> > MT5634ZBA-USB-V92 MultiModemUSB
> > Bus 002 Device 001: ID 0000:0000
> > Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp.
> > Bus 003 Device 001: ID 0000:0000
> > Bus 001 Device 001: ID 0000:0000
> > Bus 001 Device 003: ID 06e0:f107 Multi-Tech Systems, Inc.
> > MT5634ZBA-USB-V92 MultiModemUSB
> > 
> > When I do a ls /dev/usb* I get the following:
> > 
> > crw------- 1 root root 253,  0 Sep 14 19:22 usbdev1.1_ep00
> > crw------- 1 root root 253,  1 Sep 14 19:22 usbdev1.1_ep81
> > crw------- 1 root root 253,  6 Sep 14 19:22 usbdev1.3_ep00
> > crw------- 1 root root 253,  8 Sep 14 19:22 usbdev1.3_ep02
> > crw------- 1 root root 253,  7 Sep 14 19:22 usbdev1.3_ep84
> > crw------- 1 root root 253,  9 Sep 14 19:22 usbdev1.3_ep86
> > crw------- 1 root root 253,  2 Sep 14 19:22 usbdev2.1_ep00
> > crw------- 1 root root 253,  3 Sep 14 19:22 usbdev2.1_ep81
> > crw------- 1 root root 253, 10 Sep 14 19:22 usbdev2.2_ep00
> > crw------- 1 root root 253, 11 Sep 14 19:22 usbdev2.2_ep01
> > crw------- 1 root root 253, 12 Sep 14 19:22 usbdev2.2_ep82
> > crw------- 1 root root 253, 13 Sep 14 19:50 usbdev2.3_ep00
> > crw------- 1 root root 253, 15 Sep 14 19:50 usbdev2.3_ep02
> > crw------- 1 root root 253, 14 Sep 14 19:50 usbdev2.3_ep84
> > crw------- 1 root root 253, 16 Sep 14 19:50 usbdev2.3_ep86
> > crw------- 1 root root 253,  4 Sep 14 19:22 usbdev3.1_ep00
> > crw------- 1 root root 253,  5 Sep 14 19:22 usbdev3.1_ep81
> > 
> > 
> > Can any of you point me to a tutorial as to how to connect these modems
> > and access them on Linux.  I have a SCO box which uses
> > regular /dev/tty1a devices, but I have not had any experience with usb
> > ports.  I do not know how to connect the information supplied by lsusb
> > with the /dev/usbdev* 
> > 
> > Thanks for your help!!!
> > 
> > Greg Ennis
> > 
> 
> Do a cat /proc/bus/usb/devices then a /proc/devices.
> 
> -- 

Neil,

thanks for your help but I am not sure what to do with it, sorry for an
entry level question

Greg

cat /proc/bus/usb/devices :

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  2
P:  Vendor=06e0 ProdID=f107 Rev= 1.00
S:  Manufacturer=Multi-Tech Systems, Inc.
S:  Product=MultiModemUSB
C:  #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=400mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=
E:  Ad=02(O) Atr=02(Bulk) MxPS=  16 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  63 Ivl=2ms
C:* #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=400mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E:  Ad=84(I) Atr=03(Int.) MxPS=  32 Ivl=128ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

cat /proc/devices

Character devices:
  1 mem
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  6 lp
  7 vcs
 10 misc
 13 input
 14 sound
 21 sg
 29 fb
 89 i2c
116 alsa
128 ptm
136 pts
166 ttyACM
171 ieee1394
180 usb
189 usb_device
202 cpu/msr
203 cpu/cpuid
216 rfcomm
226 drm
252 blktap
253 usb_endpoint
254 pcmcia

Block devices:
  1 ramdisk
  7 loop
  8 sd
  9 md
 22 ide1
 65 sd
 66 sd
 67 sd
 68 sd
 69 sd
 70 sd
 71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
253 device-mapper
254 mdp